Loading ...
Loading ...
Loading ...
Dimension & Clearance
1312
Gas Supply Requirements
Gas Supply Requirements
Installation of this range must conform with local codes, or in the absence of
local codes, with the national Fuel Gas Code ANSIZ223.1 / NFPA 54.
In Canada, installation must conform to the current natural Gas Installation /
code, CAN 1-1.1-M81 and with local codes where applicable.
This range has been design-certified according to ANSIZ21.1a, latest edition.
Safety Tips for Gas Operation
Keep appliance area clear and free from combustible materials, gasoline, and other
flammable vapors.
Do not obstruct the flow of air into the range and ventilate air away from the range.
Ventilation: it is a must that the unit be set under a powered, vented exhaust hood of sufficient
size and capacity.
Before installing the range, you must locate and secure the included anti-tip device to the wall
for your range.
WARNING
The appliance cannot be used for space heating. This information is based
on safety considerations.
All openings in the wall behind the appliance and in the floor under the appli-
ance must be sealed.
Dimensions and Clearance
The range may be installed flush to the rear wall.
You may install a non-combustible material, such as tile, on the rear wall
above the range and up the vent hood.
It is not necessary to install non-combustible materials behind the range be-
low the countertop height.
The minimum distance from the side of the range above the counter top to
combustible side walls must be at least 10 inches.
)saGlarutaN(GN.c.w.niPLgnidaeR
in. w.c.
Maximum gas pressure
13.0.
10.0
Appliance Regulator Setting for outlet
pressure
10.0
5.0
CAUTION
The use of cabinets for storage above the appliance may result in a potential burn hazard.
Combustible items may ignite; metallic items may become hot and cause burns. If cabinet stor-
age is to be provided, the risk can be reduced by installing a range hood that projects horizontally
a minimum of 5" (12.7cm) beyond the bottom of the cabinets.
Loading ...
Loading ...
Loading ...