Loading ...
Loading ...
Loading ...
23
The coee is weak or not creamy
enough.
The coee is ground too coarsely. Turn the grinding adjustment dial (A5) one
click anticlockwise towards "1" while the cof-
fee mill is in operation (g. 13). Continue one
click at a time until coee delivery is satisfac-
tory. The eect is only visible after delivering
2 coees (see section “8.4 Adjusting the coee
mill”).
The coee is unsuitable. Use pre-ground coee for espresso machines.
The coee is delivered too slowly or a
drop at a time.
The coee is ground too nely. Turn the grinding adjustment dial (A5) one
click clockwise towards "7" while the coee
mill is in operation (g. 13). Continue one click
at a time until coee delivery is satisfactory.
The eect is only visible after delivering 2
coees (see section “8.4 Adjusting the coee
mill”).
Coee does not come out of one or
both of the spouts.
The coee spouts (A7) are blocked. Clean the spouts with a toothpick (g. 31).
The appliance does not come on. It is not plugged into the mains socket. Plug into the mains socket (g. 1).
The main switch (A19 ) is not turned
on.
Press the main switch (g. 2).
The infuser cannot be extracted. The appliance has not been turned o
correctly
Turn the appliance o by pressing the
button (B1-g. 9) (see section “6. TURNING THE
APPLIANCE OFF”).
The milk does not come out of the
milk spout (D5).
The lid (D2) of the milk container (D4)
is dirty
Clean the milk container lid as described in sec-
tion “11.10 Cleaning the milk container”
The milk contains large bubbles and
squirts out of the milk spout (D5) or
there is little froth
The milk is not cold enough or is not
semi-skimmed.
Use skimmed or semi-skimmed milk at refrige-
rator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk.
The froth adjustment dial (D1) is incor-
rectly adjusted.
Adjust following the instructions in section
“9. MAKING CAPPUCCINOS AND MILK BASED
COFFEES”
The milk container lid (D2) or froth
adjustment dial (D1) are dirty
Clean the milk container lid and dial as de-
scribed in section “11.10 Cleaning the milk
container”.
The hot water connection nozzle (A8)
is dirty
Clean the connection nozzle as described in
section “11.11 Cleaning the hot water connec-
tion nozzle”