Loading ...
2
Package Contents
SCREEN: This is where you view your visitor that the camera sees.
MONITOR: Press this button to connect to the camera and view what the camera
sees.
TALK: Press the TALK button to speak to your visitor. You do not need to hold down
the button. The MONITOR connects to the doorbell for 1 minute. If you need to talk
for longer, you will need to re-press the TALK button.
UNLOCK: If you have attached an electric door strike to the CAMERA, you can unlock
the door by pressing this button.
WARNING: If you get unwanted visitors, you can press this BUTTON to trigger an
alarm at the doorbell that will maybe scare o the visitor or attract attention.
MICROPHONE: The visitor speaks into this to communicate with the MONITOR.
Microphone
Screen
Monitor
Talk
Unlock
Warning
3.5" TFT -LCD monitor
Monitor bracket
User's
Manual
Power adapter
Cable
User's manual
Screws and others
What is included
Outdoor camera
& bracket
Layout
7
Troubleshooting
INDOOR MONITOR
Operating Power:
Resolution:
Display size:
Cut-o time:
Operating temperature:
External Dimensions:
OUTDOOR CAMERA
Power supply:
Viewing angle:
Lighting source:
Night vision distance:
Operating temperature:
External dimension:
DC 13.5V
320x240
3.5” LCD
1 minute (before unit enters standby from call/monitor)
-20°c ~ +50°c / -4°F ~ 122°F
167mm x 98mm x 25mm / 1.0” x 6.6” x 3.9”
(supplied by monitor)
52° for the pinhole camera
Infrared LED
9ft / 3m
-20°c ~ +50°c / -4°F ~ 122°F
100mm x 100mm x 22mm / 3.9” x 3.9” x 0.9”
Due to product improvements, specifications may change
without notice.
No sound or hard to hear the visitor:
If you are nding it hard to hear the visitor, adjust the volume on the side of the
monitor to make it louder. If this is not su cient, ask the visitor to stand closer to the
doorbell unit when speaking.
If the visitor is nding it hard to hear you, stand closer to the MONITOR unit when
speaking.
If you are still having di culties, check that everything is properly installed as per the
Installation and Wiring instructions.
The image is unclear or you cannot see the visitor:
Make sure there is nothing covering the lens on the DOORBELL.
If you are nding it hard to see your visitor, adjust the brightness or ask the visitor to
stand closer to the doorbell. The doorbell is quite good at displaying people standing
within a few meters of the doorbell in darkness but if you are still having problems,
you may need to install an additional light near the doorbell to illuminate the area.
Make sure the wiring is attached as per the color coding shown on the back of the
unit and in the diagrams in this manual.
The door is not unlocked when you press the door unlock button:
Make sure the wiring to the door strike (door latch mechanism) is wired correctly and
that the wires are properly attached.
NOTE: You will require a 12V DC powered doorlock mechanism.
Loading ...
Loading ...