Loading ...
Loading ...
Loading ...
13
Clean lock
If you wipe over the control panel while the cooking zone
is turned on, settings may be altered.
To prevent this from happening, your cooktop has a
clean lock function. Touch the - Dsymbol. A signal
sounds and the indicator light above the
- Dsymbol
lights up. The control panel is locked for 30seconds.
You can now wipe over the control panel without altering
any settings.
Note: The main switch is excluded from the clean lock
function. You can turn off the cooktop at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating. ”‰ and the residual heat
indicator
•/œ flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1to 10hours).
Basic Settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display Function
™‚
Automatic child lock
‹ Off*
‚ On
™ƒ
Sound signals
‹ Confirmation beep and error signal off
‚ Only error signal on
ƒ Only confirmation beep on
„ All signals on*
™†
Automatic timer
‹ Off*
‚-ŠŠ Automatic shut-off time
™‡
Duration of timer end signal
‚ 10seconds*
ƒ 30seconds
„ 1minute
™Š
Selection time for heating element
‹Unlimited*: You can adjust the settings of the last heating element used at any time without having to
select it again.
‚Restricted: You can adjust the settings for the last heating element used within 10seconds after
selecting it. After that you will have to reselect the heating element before setting it.
™‹
Reset to basic settings
‹ Off*
‚ Reset the appliance to basic settings
*factory settings
Loading ...
Loading ...
Loading ...