Loading ...
Loading ...
Loading ...
10
• Follow National Electrical
Code (NEC) or local codes and
ordinances.
• For personal safety, this Zoneline
must be properly grounded.
• NEC requires units controlled
by NEC Class 2 low voltage remote
controls to be permanently
connected.
• Protective devices (fuses or circuit
breakers) acceptable for Zoneline
installations are specified on the
nameplate of each unit.
• Disconnect the power to the unit
before servicing by:
1
Removing the power cord
(if it has one) from the wall
receptacle.
or—
2
Removing the branch circuit
fuses or turning the circuit
breakers off at the panel.
CAUTION:
•
Before starting the installation, the
power to the direct connect wiring
should be off.
•
Do not use an extension cord with
this unit.
•
Aluminum house wiring may
present special problems—
consult a qualified electrician.
Important Notes
Installation Instructions
Important electrical safety—read carefully
•
Installer:
Leave these instructions
with the appliance.
•
Owner:
Keep these instructions
for future use.
Loading ...
Loading ...
Loading ...