GE®
MWF, GWF, GWFA, GWF01, GWF06, MWFA, WR02X11020, WR02X11287,
WR02X11290, WR2M3552, WR97X10006
Hotpoint®
HWFA, HWF, MWF, MWFA
Kenmore®/ Sears®
9991, 469991, 46-9991, 9996, 469996, 46-9996
GENERAL INSTALLATION GUIDELINES
• It is normal for black carbon particles to appear on the outside of your new
lter during shipping. Simply wipe it away before installation.
• This water lter is designed to prevent leaks. Please twist in place securely to
ensure a proper t.
1 Twist the old lter a quarter-turn counterclockwise.
2 Pull the lter straight down and discard.
3 Push the new lter up into the refrigerator until it stops.
4 Twist the lter a quarter-turn clockwise.
5 Run about two to three gallons of water through your refrigerator’s water
dispenser to remove air and loose carbon pieces. The water may be cloudy
and sputter until the air is removed.
6 Reset your “change lter” indicator (if your refrigerator has one). See below.
BEFORE USING YOUR FILTER
If your refrigerator has a change lter indicator, reset it.
See “Resetting your lter indicator” for instructions.
RESETTING YOUR FILTER INDICATOR
Note: These are the most common lter reset instructions. If the instructions don’t work
for your refrigerator brand, see the documentation that came with your refrigerator.
Before using your new product, please read these
instructions to prevent any damage.
PACKAGE CONTENTS
• Refrigerator lter(s) (1 or 2 pack)
• Quick Setup Guide
REFRIGERATOR
BRAND
GE®or Hotpoint®
Kenmore®
INSTRUCTIONS
Press and hold the reset water lter button on the
dispenser for three seconds.
The water lter reset for Kenmore refrigerators varies by model.
See the documentation that came with your refrigerator.
QUICK SETUP GUIDE
Refrigerator
Filter
NSGEMW531
Loading ...
