Loading ...
Loading ...
Loading ...
14
13
14
13
HOW TO USE / ADJUST AIR QUALITY SENSOR
ADJUST AIR QUALITY SENSOR
1. While the air purier is on, press the airow speed
button and LED Light button for 2 seconds.
2. The speed indicator will ash at one-second intervals
with beeping sounds. The speed indicator blinks to
show the sensor sensitivity.
4. Press the airow speed button and LED Light button
for 2 seconds.
The air purier will then resume normal operations.
∗
The new setting will also be applied if no button is input for 10 seconds.
When the product is shipped out, the air quality sensor is set to standard sensitivity. If the pollution level
stays at the highest level after 2 hours of operation or stays at the lowest level for more than 1 hour when
the air does not seem clean, users can adjust the sensitivity of the air quality sensor as follows.
3. Adjust the sensitivity by pressing the speed button.
The speed indicator blinks to show the sensor sensitivity.
∗
High sensitivity: If the air purier indicates a pollution level of 1 for longer
than one hour when the actual pollution level is higher.
∗
Low sensitivity:
If the air purier continues to indicate the highest pollution
level even after running the air purier for more than two hours.
Speed 1 Speed 2 Speed 3
Sensitive Standard Insensitive
2 seconds
2 seconds
2 seconds
2 seconds
How to Use
Loading ...
Loading ...
Loading ...