Loading ...
Loading ...
Loading ...
39
Troubleshooting
B
ef
ore
c
al
l
i
ng
f
or
s
erv
i
c
e,
c
hec
k
t
he
probl
em
agai
ns
t
t
he
l
i
s
t
bel
l
ow.
Symptom Error Message
What to Check
• Is the water tap shut off?
• Is the water supply cut off ?
• Is the drain hose installed too low?
• Is the water pressure too high or too low, or is the filter of the
inlet valve clogged with impurities?
• Is the Hot hose connected to cold?
• Is the Cold hose connected to hot?
Water Supply
Failure
Drainage Failure
Spin Failure
Door(Lid) Open
Door(Lid) Lock
malfunction
Foreign objects
• Is the drain hose positioned correctly?
• Is the drain hose bent or placed too high?
• Is the internal part of the hose or drain pump
(only pump model) clogged with impurities?
• Check if electric power has gone off.
• Is the laundry evenly balanced?
• Is the washing machine placed on a flat and level surface?
Press the "Start/Pause" button to release the , now distribute
the laundry evenly and then press the "Start/Pause" button again to
resume the cycle.
• Is the lid closed?
Child Lock
• CL(Child Lock) does not indicate a malfunction.
• This function prevents accidental cycle changes or interruptions during
the wash cycle The Child Lock function will remain engaged even after
the cycle has tinished Press the Rinse button for 3 seconds to unlock.
Take care not to set up inadvertently during use.
• Is the lid closed?
• Make sure that the lid is closed properly and press the
START/PAUSE button.
The washer will not operate unless the lid is locked.
• Make sure that nothing is caught under the lid, including shipping
material or clothing.
• A
re there foreign objects, Such as coins, pins, etc., caught
between the wash pulsator and the inner tub ?
• T
urn off the washer and then press the Power button.
Pres
s the spin speed button without selecting a cycle to drain and
spin the load.
W
hen t
he spin is complete, remove the clothes and then find and
rem
ove any objects caught in the wash pulsator.
• Please call your nearest LG Electronics service center for help.
Tub Cle
a
n
R
e
minder
•
E
m
pt
y the tub, insert bleach into the detergent dispenser and select
the T
ub C
lean cycle.
•
If you want to skip the Tub Clean, press the program and option
buttons to select desired cycle. In this case, you will see the
m
essage again after a few more wash cycles. Once the Tub Clean
cycle is performed, will disappear until the next reminder to
clean the tub.
MFL69022796(영)호주향_150x210 16. 3. 25. 오전 9:40 페이지 39
Loading ...
Loading ...
Loading ...