Loading ...
Loading ...
Loading ...
4 BISSELL.com
Using Your Vacuum
For additional ways to use your vacuum’s features, check out support.BISSELL.com.
Above Floor Cleaning
Visit support.BISSELL.com to see all the ways you can use your vacuum’s tools.
1. Turn power ON. Turn the
Brush Roll ON for carpet
cleaning and the light switch
will illuminate. Turn the Brush
Roll OFF when vacuuming
hard or delicate surfaces like
hardwood, tile, small rugs, or
frieze carpets with long fibers.
2. Step gently on base and pull
the handle back to recline.
Note: The Brush Roll
automatically shuts OFF when
vacuum is locked in upright
position. Recline to reactivate.
3. Use the Carpet Type Control
for optimized cleaning on high
pile and low pile carpet. The
control can be moved to the
middle position for medium
pile carpeting.
1. Clean hard-to-reach
spaces with the Quick Release
Extension Wand. Push the
release button to remove and
attach desired tool.
2. The Stretch Hose can be
removed from the extension
wand. To do so, twist circular
hose cuff counter-clockwise
and remove from Handle.
3. Attach desired tool.
Note: For optimal use, attach
the Pet TurboEraser® Tool
directly to the Hose instead of
the wand.
4. Replace the wand by sliding
into place until you hear a
“click”. Reattach Hose to
Handle if needed.
WARNING Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
Loading ...
Loading ...
Loading ...