Loading ...
Loading ...
Loading ...
2 3
Using a damp cloth, wipe over both sections with
the citric acid solution. Do not put in a dishwasher
or rinse under the tap.
To attach the loop amplifier surround, lie flat and align
the surround to the main amplifier. Push firmly until it
clicks into place as shown.
To remove the seal, pinch the securing tabs together
and pull out. Clean thoroughly by immersing in the
recommended citric acid solution for 15 minutes. Rinse and
wipe over all surfaces. Repeat if necessary. To refit, push
back in so the tabs click and the fit is secure.
Pour in the recommended citric acid solution. Replace the
cap and shake tank for 30 seconds. Then leave to stand.
After 15 minutes, empty the tank. Rinse and wipe over all
surfaces. Repeat if necessary.
UV-C emitter
Piezo
Re-assemble. Wipe the exterior with a lint-free
microfibre cloth. Switch ‘ON’: the water treatment
procedure starts. After 3 minutes the appliance will start
to humidify.
dishwasher. Fill the trough with the recommended acid citric
solution until the UV-C emitter and piezo are submerged.
Leave for 15 minutes. Drain, rinse and wipe over all surfaces.
Repeat if necessary.
8
6
5
Cleaning procedures must be routinely followed to ensure
that the humidifier continues to operate efficiently. Cleaning
regimes are designed to help prevent the build up of scale
within the machine, which will be more prominent in hard
water areas. Failure to adhere to the cleaning regimes may
invalidate the warranty.
15 mins
15 mins
1
2
1
1
2
1
13
Loading ...
Loading ...
Loading ...