Loading ...
Loading ...
Loading ...
Cybex 750C/750R Cycle Owner’s Manual
19
Assembly and Setup
Warnings and Cautions
Read and understand all warnings and cautions listed in the Safety chapter before assembling unit.
Use extreme caution when assembling the unit. Failure to do so could result in injury or death.
CAUTION: Serious injury or damage to machine can occur. To avoid injury or damage
the following procedure must be followed. Always use proper lifting methods
when moving heavy items.
Be sure all electrical requirements are met as indicated in the specications in the Safety chapter and
as listed in this chapter.
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled. Place a 3/4” (1.9 cm) thick wood base under unit
to protect carpeting.)
• Area allows for ample access and passage clearance around unit or for emergency dismount.
Minimum clearance is 19.7 inches (.5 meters) on at least one side of unit and also in front of or
behind unit.
The access and passage clearance dimensions stated are the recommended minimum dimensions
as set forth by the manufacturer. The actual area for access and passage is the responsibility of the
facility and should take into account any required local codes or regulations.
• Area is not in the vicinity of high humidity, such as in the vicinity of a steam room, sauna, indoor
pool or outdoors. This unit is designed to function normally in an environment with a relative
humidity range of 30% to 75%.
Exposure to extensive water vapor, chlorine and/or bromine could adversely affect the electronics as
well as other parts of the unit.
• Area maintains an ambient temperature range of 50o F (10o C) to 104o F (40o C) degrees.
Loading ...
Loading ...
Loading ...