Loading ...
Loading ...
Loading ...
Operating Your Dehumidifier
SAFETY DEVICES
This appliance has two protection devices:
• Resettable Thermal Link - this will automatically disconnect the power to the
appliance at a pre-set overheat temperature. After cooling down it will reset and
power on again. If this occurs, investigate what is causing the appliance to
overheat.
• Thermal Fuse - this disconnects the appliance permanently in case of overheating.
(It is non resettable).
CARE AND CLEANING
The dehumidifier requires regular cleaning to ensure trouble free operation:
• Unplug the dehumidifier from the mains supply before cleaning.
• Ensure that the dehumidifier has been allowed to cool down completely before
cleaning.
• The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.
RE-ATTACHED THE FILTER
REMOVING FILTER AND WASH WITH WATER
• The water tank should be cleaned every few weeks to prevent growth of mould,
mildew, and bacteria.
• Partially fill the tank with clean water and add a little mild detergent. Swish it
around and then empty the tank and rinse.
Note: After cleaning, drying, and reassembling the water tank, it must be reinserted
securely into dehumidifier in order to restart operation.
STORAGE
If you plan on not using your dehumidifier for a long time, store your dehumidifier by
following these instructions:
1. Switch off the unit and unplug it from the mains socket.
2. Empty and clean the water tank.
3. Clean the unit and the filters (Please refer to the Care and Cleaning Section).
4. Cover the unit and keep it in a dry place.
Loading ...
Loading ...
Loading ...