Loading ...
Loading ...
Loading ...
10
Take out and disassemble the roller brush kit as
shown in figure below, and clean it with soft clea-
ning cloth or tool. (The roller brush axle is washa-
ble.）
Note:Recommended to change the main brush per 6-12 months to
ensure the cleaning effect.
1. Open the robot cover
and take out the dust bin.
Brush Cover
Main Brush
Buckles
2. Uncap the dust bin to dump trash
3. Clean the filter
4. Reassemble the dust bin
Clean the filter
The filter can not be washed with water. It is recommended
to replace the filter every 3 months.
To avoid clogging the filter, it is recommended to clean the
filter regularly with a cleaning brush;
Recommended to change the side brush every 3 months to ensure the
cleaning effect
Regularly clean the sensors with a soft rag.
Disassemble and clean the side brush regularly.
Fall-Arrest Sensors
Map Rebuilding
1.Robot builds a new map when it starts in a strange
area.
2.A great change of the indoor home environment will
cause the positioning fail, and hence the robot rebuilds
the navigation map.
Rebuilding the map will result in the loss of settings
made on the original map (including the Off-Limits
Area).
DND mode(Do-not-disturb mode)
During the DND period, the robot does not automa-
tically resume work and actively play the voice. DND
mode is enabled by default in the factory, and its op-
ening time is 22:00-07:00.Please disable DND mode
by app.
·See troubleshooting for solutions,in Page 11.
No operation after 5 minutes in failure state,the robot will automatically enter
sleep mode
Failure State
When the robot has an error, Clean Button or
Recharge Button blinks, and the voice prompts.
Disassemble the water tank in the middle
of cleaning.
If you want to add water in the middle of cleaning, please
stop the robot by pressing of the robot.After adding
water and reassemble the water tank,please press
to continue cleaning.
Main Brush
Clean Dust Bin and Filter
Product Maintenance
Fall-Arrest Sensors
Side Brush
Loading ...
Loading ...
Loading ...