Loading ...
Loading ...
Loading ...
*IMPORTANT NOTE:
This treadmill does come pre-lubricated, but it is recommended to lubricate your treadmill before the
first use.
RUNNING BELTS & TREADMILL LUBRICANT:
Lubricating the Running Board (No. 21) and Running Belt (No. 22) is essential as the friction
affects the life span and operation of the treadmill. It is suggested that the Running Board (No. 21)
and Running Belt (No. 22) be inspected regularly. If you find any wear on the Running Board (No.
21), please contact us at:support@sunnyhealthfitness.com.
WARNING:
Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or repairing
the unit.
HOW TO LUBRICATE:
Raise the Running Belt (No. 22) up on one side and apply lubricant to the Running Board (No.
21). Use a rag to thoroughly wipe the lubricant over the Running Board (No. 21). Repeat this
process for the other side.
The moving parts should turn freely and quietly. Abnormal moving parts will affect the safety of the
equipment. Inspect and tighten bolts regularly.
To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance be done
on a regular basis.
DO NOT LOOSEN OR MAKE ANY ADJUSTMENTS TO THE RUNNING BELT WHILE APPLYING
LUBRICANT. A loose Running Belt (No. 22) will result in the runner sliding off when in use, while
too tight of a Running Belt (No. 22) will decrease to the motor's performance, and also create more
friction between the roller and Running Belt (No. 22). The most suitable tightness for the Running
Belt (No. 22) is when it is pulled out 50-75mm from the Running Board (No. 21).
The following time table is recommended:
Light user (less than 3 hours/week)
Medium user (3-5 hours/week)
Heavy user (more than 5 hours/week)
Lubrication
Version 1.5
every six months
every three months
every two months