Loading ...
Loading ...
Loading ...
1. Window Display:
A. Distance: Displays exercise distance and counts forward from 0.00-99.0.
B. Time / Step: Displays time in the default settings and switches the display every 5
seconds.
Time: Displays the exercise time. Manual mode counts forward from 0:00-99:59. Once the
count reaches 99:59, the treadmill decreases the speed steadily to a stop. The speed window
will display “End” and will reach a complete stop after 5 seconds.
Step: Displays the current exercise steps and counts forward from 0-9999.
C.
Calorie: Displays the calories burned and counts forward from 0.0-9999.
D.
Speed: Displays the current exercise speed value, with a range from 0.6-8 MI/H.
2. Key Functions:
A. Start/Pause: Press this button to start the treadmill. When the treadmill is in operation
press this button to pause the treadmill.
B. Stop: When the treadmill is running, press this button to stop the treadmill.
C. Increase Speed: Press this button to increase the setting speed. When the treadmill is
running, pressing the button gradually to increase the speed by 0.1 mi/h. Holding the button for
more than 0.5 seconds will steadily increase the speed automatically.
D. Decrease Speed: Press this button to decrease the setting speed. When the treadmill is
running, pressing the button gradually to decrease the speed by 0.1 mi/h. Holding the button for
more than 0.5 seconds will steadily decrease the speed automatically.
E. Speed Shortcut: By pressing 2, 4 mi/h, you can directly change the treadmill
speed while the treadmill is in operation.
F. Metric/Imperial Change:
Turn on the treadmill, remove the Safety Key (No. 26), press and hold
buttons
together for about 3 seconds until a number shows up on the right side of the screen. If it is
showing “1.0”, that means it is in metric (km/h) system; if it is showing “0.6”, that means it is in
imperial (m/h) system. To change again, simply turn off the treadmill and repeat above steps.
Display Console
Loading ...
Loading ...
Loading ...