Loading ...
Loading ...
Loading ...
Subframe
(cont’d)
Servicing Your Honda 37
Refer to Important Safety Precautions on page 23.
Removal
1. Remove the seat (page 33).
2. Remove the shroud A bolt (1), shroud B bolt
(2) and shroud C bolt (3).
3. Slide the shroud (4) toward the up to separate
from the air cleaner housing cover (5), and
then remove the shroud.
The right and left shrouds can be removed in the
same manner.
4. Remove the right and left mufflers (page 115).
5. Remove the seat support base mounting bolts
(6), and collars (7).
6. Disconnect the starter/ignition relay connector
(8) and remove the seat support base (9).
7. Lift the seat support base (9) and hang it to the
left of the subframe (10).
8. Disconnect the breather tube (11) and IAT
sensor connector (12).
9. Loosen the air cleaner connecting tube clamp
screw (13).
10. Disconnect the negative (–) terminal (14) from
the battery (15).
(1) shroud A bolt
(2) shroud B bolt
(3) shroud C bolt
(4) shroud
(5) air cleaner housing cover
(4)
(3)
(2)
(1)
(5)
(6) seat support base mounting bolts
(7) collars
(8) starter/ignition relay connector
(9) seat support base
(9) seat support base
(10) subframe
(7)
(6)
(7)
(9)
(8)
(10)
(9)
(11) breather tube
(12) IAT sensor connector
(13) air cleaner connecting tube clamp screw
(14) negative (–) terminal
(15) battery
(11)
(12)
(13)
(14)
(15)
Loading ...
Loading ...
Loading ...