Loading ...
Loading ...
Loading ...
34 English
Troubleshooting
Maintaining your appliance
2. While holding the glass cover with one
hand, insert a at-sharp tool such as a
table knife between the glass and the
frame to remove the glass cover.
3. Turn the bulb cap counterclockwise to
remove.
NOTE
If necessary, remove the metal rings and
clean the bulb cap.
4. Replace the bulb.
5. Place the bulb cap and glass cover back
into their position.
6. Return the broil heater back by
following step 1 in reverse order.
CAUTION
Before changing your oven light, disconnect
the electrical power to the oven at the main
fuse or circuit breaker panel. Make sure the
oven and the halogen bulb are cool.
Troubleshooting
Troubleshooting
Samsung works hard to ensure that you don’t have problems with your new
electric oven. If you run into unexpected trouble, look rst for a solution in the
tables below. If you’re still having trouble after trying the suggested solution, call
Samsung at 1-800-SAMSUNG (726-7864).
CONTROL DISPLAY
Problem Possible cause Solution
The display
goes blank.
A fuse in your home may be
blown or the circuit breaker
tripped.
Replace the fuse or reset the
circuit breaker.
The buttons
cannot be
pressed
properly.
• There is foreign matter
caught between the
buttons
• Touch model: There is
moisture on the exterior
• The lock function is set
• Remove the foreign
matter and try again.
• Remove the moisture and
try again.
• Check whether the lock
function is set.
NV51R5511S_AA_DG68-01125A-02_EN+MES+CFR.indb 34 11/5/2019 10:24:36 AM
Loading ...
Loading ...
Loading ...