Loading ...
Loading ...
Loading ...
17
EN
Assigning a comment
You can assign comments to each WLAN adapter. Assigning
comments is not required, but it can help you identify individual
WLAN adapters within your organization.
1
Open the WLAN adapter configuration interface by entering
its IP address in your Web browser or using the WLAN
adapter Administration Tool.
2
Enter the name of the oce (where the WLAN adapter is
installed) along with a comment in the comments panel. This
will help you identify this WLAN adapter.
3
Press the SUBMIT button at the bottom of the comments
panel to save your changes.
Note
• The ROOM field is limited to 128 characters; the
COMMENT field is limited to 255 characters.
Upgrade the firmware of connected
Pocket Memo dictation recorders
The WLAN adapter can be used to upgrade the firmware of
Pocket Memo dictation recorders via the network.
1
Save the firmware upgrade file (.dpm) for the Pocket Memo
dictation recorder to a network location that the WLAN
adapter can access. This can be either an FTP server or an
HTTP Web server.
2
Open the WLAN adapter configuration interface by entering
its IP address in your Web browser or using the Administra-
tion Tool.
3
Select the type of server (FTP, FTPS, HTTP) where you
have saved the firmware upgrade file (.dpm) in the Firmware
upgrade panel.
4
Enter the domain name or IP address of the server hosting
the firmware file into the SERVER field (the server does
not have to be on your Local Area Network). If you refer-
ence the server using its domain name, make sure that at
least one DNS server is configured (Assigning a static IP
address, p. 15) or that you are using DHCP (Assigning
an IP address from DHCP, p. 15).
5
Enter the port number of your server into the PORT field.
Unless your server is configured to use nonstandard port
numbers, you should use 21 for an FTP server and 80 for an
HTTP Web server.
6
If your server requires authentication to download the firm-
ware file, enter the name of the user account, the password,
and confirm the password. Otherwise leave the USER
NAME, PASSWORD and CONFIRM PASSWORD
text fields empty.
7
Enter the full path (beginning with “/”) and file name to the
firmware upgrade file (.dpm) into the DPM FILE text field.
Leave the WLAN ADAPTER FILE text field empty.
8
Press the UPGRADE NOW button at the bottom of the
panel to save your changes.
English
Loading ...
Loading ...
Loading ...