Loading ...
Loading ...
Loading ...
Knobset Rekeying Grade 3 Residential
33
Insert the operating key and unlock the
knob. If an operating key is not available,
pick to unlock.
Turn the outside knob clockwise until the
retainer aligns with and is visible under the
poke hole.
Use the knob release tool to depress the
knob retainer and pull knob from the
spindle.
Remove knob ferrule and then remove
cylinder from knob. Remove C clip from
cylinder.
Turn plug 45° in either direction. Use the plug follower to push the plug out
of the shell. Note: Use the notched end
against the end of the plug.
Pull the key from the plug and remove pins
from all chambers.
Insert new key. If the key isn’t stamped
with a direct code, decode. Our example
key is combination 22561.
Select a bottom pin #2 from the keying kit and
place it in the first pin chamber. Key the rest of
the cylinder as: #2 in the second chamber, #5 in
the third chamber, #6 in the fourth chamber,
#1 in the fifth chamber.
Check that all pins are flush with the
surface of the plug with the new key
inserted.
Push circlip retainer onto
the end of the plug.
Knob
Release Tool
Key
Bottom Pin
Pin Hole
Plug
1st
Hole
2
Flush w/plug sufrace
2nd
Hole
2
3rd
Hole
5
4th
Hole
6
5th
Hole
1
With the plug
turned 90° from
vertical, push follower from
the shell with the plug.
Loading ...
Loading ...
Loading ...