Loading ...
Loading ...
Loading ...
USA
5
AFTER SALES SUPPORT
Operating Instructions
Before first use, remove any packaging material or labels. Wash all pieces of the blender
in warm, soapy water. Dry thoroughly. Care should be taken when cleaning the blades,
as the blades are sharp.
ASSEMBLY
To use your Chefman® 500-Watt Blender, begin by assembling the blender jar.
1. Turn the blender jar upside down, and place it flat on a sturdy surface.
2. Turn the cutting assembly upside down, and place the blade end in the blender
jar opening, make sure rubber gasket is secure. Note: Blades are sharp. Handle
carefully.
3. Secure the cutting assembly into position. Engage threads by twisting the locking
ring counter-clockwise. Make sure the blade assembly is in the lock position. Once
assembled, turn the blender jar right-side up.
4. Push the cover onto the top of the blender jar. Insert the measuring filler cap into the
cover, aligning the tabs in the filler cap with the slots in the cover. Twist clockwise to
lock filler cap into the cover.
5. Place the blender jar on the motor base so the handle is positioned to the back of the
blender base. Twist the jar clockwise to lock into place.
6. Plug in power cord. Your blender is now ready to be used.
OPERATION
1. Place the motor base of your Chefman® 500-Watt Blender on a flat, sturdy surface.
It is important that the surface be clean and dry. Assemble the blender by following
the assembly instructions. Once the jar is assembled and is in position on the motor
base, plug the Chefman® 500-Watt Blender into an electrical outlet.
2. Add all necessary ingredients to the blender jar, and place the cover on the jar. You
may add more ingredients by lifting the measuring filler cap and dropping ingredients
through the fill area. Replace the measuring filler cap after adding ingredients. Do not
place hands in blender jar while blender is plugged in.
Note: Add liquid ingredients first, and then follow with solid ingredients. This will
provide more consistent blending and prevent unnecessary stress on the motor.
Note: To remove blender jar cover, lift edge of cover upward. Lifting the measuring
filler cap will not remove cover.
3. To start blending turn the knob to your preferred blending speed. The blender will
now be functioning at the desired speed. Simply turn the knob to adjust blending
speed.
Loading ...
Loading ...
Loading ...