User Manual Husqvarna 967650901 440 2-Cycle Gas Chainsaw

Documents for Husqvarna 967650901

Operator's manual

For 967650901. Also, The document are for others Husqvarna models: 435 II, 435E II, 440E II

• ENGISH9
  • Contents9
  • Introduction9
    • Product Description9
    • Intended Use9
    • Product Overview9
    • Symbols On The Product9
    • EPA III10
    • California Proposition 6510
  • Safety10
    • Safety Definitions10
    • General Safety Instructions10
    • Safety Instructions For Operation10
      • Personal Protective Equipment11
      • Safety Devices On The Product12
        • Chain Brake And Front Hand Guard12
        • Throttle Trigger Lockout12
        • Chain Catcher12
        • Right Hand Guard12
        • Vibration Damping System12
        • Start/stop Switch12
        • Muffler12
      • Fuel Safety13
    • Safety Instructions For Maintenance13
      • Safety Instructions For The Cutting Equipment13
  • Assembly13
    • Introduction13
    • To Assemble The Guide Bar And Saw Chain13
  • Operation14
    • Introduction14
    • To Do A Function Check Before You Use The Product14
    • Fuel14
      • Premixed Fuel14
      • To Mix Fuel14
        • Gasoline14
        • Two Stroke Oil14
        • To Mix Gasoline And Two Stroke Oil14
      • To Fill The Fuel Tank15
      • To Do A Run In15
      • To Use The Correct Chain Oil15
    • Kickback Information15
      • Common Questions About Kickback16
    • To Start The Product16
      • To Prepare To Start With A Cold Engine16
      • To Prepare To Start With A Warm Engine16
      • To Start The Product16
    • To Stop The Product17
    • Pull Stroke And Push Stroke17
    • To Use The Cutting Technique17
      • To Use The Spiked Bumper17
      • To Cut A Trunk On The Ground17
      • To Cut A Trunk That Has Support On One End17
      • To Cut A Trunk That Has Support On Two Ends17
    • To Use The Limbing Technique17
    • To Use The Tree Felling Technique18
      • To Keep A Safe Distance18
      • To Calculate The Felling Direction18
      • To Clear The Trunk And Prepare Your Path Of Retreat18
      • To Fell A Tree18
        • The Felling Hinge19
        • To Make The Directional Cuts19
        • To Use The Safe Corner Method19
      • To Free A Trapped Tree19
      • To Cut Trees And Branches That Are In Tension19
    • To Use The Product In Cold Weather20
  • Maintenance20
    • Introduction20
    • Maintenance Schedule20
    • Maintenance And Checks Of The Safety Devices On The Product21
      • To Do A Check Of The Brake Band21
      • To Do A Check Of The Front Hand Guard And The Chain Brake Activation21
      • To Do A Check Of The Chain Brake21
      • To Do A Check Of The Throttle Trigger And Throttle Trigger Lockout22
      • To Do A Check Of The Chain Catcher22
      • To Do A Check Of The Right Hand Guard22
      • To Do A Check Of The Vibration Damping System22
      • To Do A Check Of The Start/stop Switch22
      • To Do A Check Of The Muffler22
    • To Adjust The Idle Speed Screw (T)22
    • To Examine If The Carburetor Is Correctly Adjusted22
    • To Replace A Broken Or Worn Starter Rope23
    • To Tighten The Recoil Spring23
    • To Assemble The Starter Housing On The Product23
    • To Clean The Air Filter23
    • To Do A Check Of The Spark Plug23
    • To Sharpen The Saw Chain24
      • Information About The Guide Bar And Saw Chain24
      • General Information About How To Sharpen The Cutters24
      • To Sharpen The Cutters24
      • General Information About How To Adjust The Depth Gauge Setting24
      • To Adjust The Depth Gauge Setting24
      • To Adjust The Tension Of The Saw Chain25
    • To Do A Check Of The Saw Chain Lubrication25
      • To Do A Check Of The Spur Sprocket25
      • To Lubricate The Needle Bearing25
    • To Examine The Cutting Equipment25
    • To Do A Check Of The Guide Bar25
    • To Do Maintenance On The Fuel Tank And The Chain Oil Tank26
    • Air Cleaning System26
    • To Clean The Cooling System26
  • Troubleshooting26
    • The Engine Does Not Start26
    • The Engine Starts But Stops Again27
  • Transportation And Storage27
    • Transportation And Storage27
    • To Prepare Your Product For Long Term Storage27
  • Technical Data27
    • Technical Data27
  • Accessories28
    • Recommended Cutting Equipment28
    • Low Kickback Saw Chain29
    • Kickback And Guide Bar Nose Radius29
    • Pixel29
    • Filing Equipment And Filing Angles29
  • Warranty30
    • CALIFORNIA, U.S FEDERAL, AND CANADA EXHAUST AND EVAPORATIVE EMISSIONS CONTROL WARRANTY STATEMENT30
    • AMERICAN STANDARD SAFETY PRECAUTIONS31
• SPANISH33
• FRENCH61