2
5
2 Speeds
5
2 Heat
Settings
6
1
3
Attention: As a safety precaution, the massager will stop running if left on for over an hour. It will automatically resume running after half an hour.
Wahl
®
Heat Therapy Massage Quickstart Guide
part no:
56535-700
Additional information available at massagers.wahl.com or 1-800-767-9245.
With the switch in the OFF position, plug the
power cord into an AC 120-V outlet.
Place desired attachment head on stem of
massager. Heads easily press on and pull off.
If heat is desired, the Deep Heat Attachment
must be used. See SPECIAL INSTRUCTIONS.
Slide the bottom switch to the desired heat
setting — I-LOW or II-HIGH. Use heat only
with the Deep Heat Attachment. Heat may be
applied alone or with the massaging feature.
Slide the bottom switch to the desired
massaging speed —
I-LOW: for soothing massage
II-HIGH: for deep-penetrating action
Apply the massager to the targeted area, using
continual movement. A circular motion is often
most effective. See MASSAGE TECHNIQUES.
Loading ...
