Loading ...
Loading ...
Loading ...
Maintenance Procedures
Maintenance Schedule
ACTION DAILY WEEKLY MONTHLY AS NEEDED
CLEAN
Guide Rods X
Hand Grips X
WAX
Frames X
INSPECT
Paint X
Hardware X
Frame X
Hand Grips X
Drop Stops X
LUBRICATE
Guide Rods X
Clean
• Guide rods with a cotton cloth.
• Hand grips with an approved or compatible cleaner.
Wax
• Frames with a standard, non-abrasive, wax finish.
Inspect
• Hardware. Check for loosening. Tighten as required.
• Frames. Inspect for wear and damage.
• Handgrips. Check for wear and damage.
• For paint chips. Fill in immediately with manufacturers touch-up paint.
• Drop stops. Check for any signs of cracking or fatigue.
Lubricate
• Lubricate guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000). Apply the lubricant to a cotton cloth, and
then run the cotton cloth up and down the guide rods as needed.
NOTE: Only a few drops of lubricant are required for each guide rod.
Once a Week
• Visually inspect all hardware for loosening, tampering or wear.
• Check condition of hand grips.
• Inspect drop stop for any signs of cracking or fatigue.
Once a Month
• Clean guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000). Clean tops of bearings at stack and inspect for
heavy buildup on rods below the head plate. half of stack and do a visual inspection, then clean as necessary.
• Inspect hardware on all machines and tighten any bolts or nuts that may have loosened over the life of the product.
Page 19 of 28
Loading ...
Loading ...
Loading ...