Loading ...
Loading ...
Loading ...
34
©
2020 DJI All Rights Reserved.
AGRAS T16
User Manual
Remote Controller LEDs
RTH Status LED
Status LED
The Status LED indicates the connection status between the remote controller and the aircraft. The RTH
status LED indicates the RTH status of the aircraft. See the table below for details on these indicators:
Status LED Sound Remote Controller Status
—
Solid Red Chime The remote controller is not connected to the aircraft.
—
Solid Green Chime The remote controller is connected to the aircraft.
Blinks Red
Beeps slowly
repeatedly
Remote controller error.
RTH Status LED Sound Aircraft Status
—
Solid White Chime RTH is initiated.
Blinks white
Repeated individual
beep
Sending RTH command to the aircraft.
Blinks white Repeated double beep The aircraft is returning to the home point.
Linking the Remote Controller
The remote controller is linked to the aircraft by default. Linking is only required when using a new remote
controller for the first time. When using Multi-Aircraft Control function, it is required to link all aircraft to the
same remote controller.
Optimal Transmission Zone
Optimal Transmission Zone
Optimal Transmission Zone
Strong Weak
The strength of the remote controller signal is affected by the position of the antennas. The
recommended position is perpendicular to the ground. Try to keep the aircraft inside the optimal
transmission zone. If the signal is weak, adjust the antennas or fly the aircraft closer.
Loading ...
Loading ...
Loading ...