Loading ...
Loading ...
Loading ...
1.1 US qt (1.0 )
11 lbf·ft (15 N·m , 1.5 kgf·m)
67
Engine Oil
Servicing Your Honda
With the motorcycle held upright on level
ground, check the oil level.
If needed, add oil (page ) until it reaches
the upper level mark. (Do not overfill.)
Check for oil leaks.
Clean the oil strainer screen.
Check that the oil strainer screen, sealing
rubber, and drain bolt O-ring are in good
condition.
Coat a new O-ring with engine oil and install
it onto the oil drain bolt groove.
Start the engine and let it idle for 3-5
minutes. Stop the engine. Wait 2-3 minutes.
Install the oil fill cap/dipstick securely.
Pour the recommended oil into the crankcase,
approximately:
Tighten the oil drain bolt to the specified
torque:
Install the oil strainer screen, spring, and
drain bolt.
7.
8.
9.
15.
16.
65
10.
11.
12.
13.
14.
１１／０６／１０ １０：１６：５２ ３１ＫＰＳ６８０ ００７６
Loading ...
Loading ...
Loading ...