Loading ...
Loading ...
Loading ...
80 lbf·ft (108 N·m , 11.0 kgf·m)
(7) lug
(8) slot
(9) brake panel
(7)
(8)
(9)
RIGHT REAR
99
Wheels
Servicing Your Honda
Installation
Reverse the removal procedure. Install the
side collar into the wheel. Make sure the lug
( ) on the swingarm is located in the slot
( ) in the brake panel ( ). Check that the
chain adjusters are installed properly.
Adjust the drive chain (page ).
Tighten the rear axle nut to the specified
torque:
If a torque wrench was not used to install the
wheel, see your dealer as soon as possible to
verify proper assembly. Improper assembly
may lead to loss of braking capacity.
Apply the rear brake, release it, then spin the
wheel and check that it rotates freely. Repeat
this procedure several times.
Adjust the rear brake (page ).
2.
3.
4.
1.
5.
7
89
108
91
１１／０６／１０ １０：２１：１６ ３１ＫＰＳ６８０ ０１０８
Loading ...
Loading ...
Loading ...