Loading ...
Loading ...
Loading ...
12
Sapphire wheel
Filing and smoothing the nails, fine-grained sapphire disc. The special of the
sapphire disc is that only the inner grinding wheel rotates while the outer section
remains stationary. This enables the nails to be filed accurately without the danger
of burning the skin with the rotating wheel.
Cylindrical milling cutter
Removing hardened toenail surfaces and coarse smoothing. Place the cylindrical
milling cutter horizontally on the nail surface and remove the nail layer with slow
rotary movements.
Flame milling cutter
For removing ingrown nails. Insert the flame milling cutter carefully to the point of
interest and remove the appropriate parts of the nail.
Sapphire milling cutter
This attachment is used for careful removal of warts. If you use this attachment,
remember that it is very quick and easy to cut into the skin deeper by accident and
injure the skin over the bone.
A complete set of all seven attachments can be ordered from the service address under order number 162.563.
5. Cleaning
Warning! Before cleaning, always unplug the device from the mains.
Warning! Beware of life-threatening electric shock: Never submerge the device in water or other liquids.
•
Clean the device with a slightly moistened cloth. In case of more extreme soiling you can also moisten the
cloth with mild soapy water.
•
Clean the attachments after every use to prevent transmission of fungus and other infections to other parts
of the body.
•
Use a toothbrush to remove stubborn callus and skin fragments.
•
If necessary, clean the attachments with a cloth or brush moistened with disinfectant spray or 90 % alcohol
(obtainable from pharmacies). Then dry the attachments thoroughly.
•
Do not use any chemical cleaners or abrasive agents for cleaning.
•
Ensure that no water penetrates into the device. If this should ever happen then only use the device once
it is completely dry.
6. Disposal
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic
Equipment).
If you have any queries, please contact the appropriate local authorities.
7. Technical Data
Nominal voltage: 100–240V ~ 50/60Hz
Rated output: 10W
Speed: Level 1: 3500 +/- 600 rpm
Level 2: 5100 +/- 800 rpm
Short operation: max. 20 min.
Dimensions (LxWxH): 28x23x8 cm
Weight: approx. 1 kg (without packaging)
Loading ...
Loading ...
Loading ...