
Setting Up August Connect (iOS and Android)
Setting Up August Connect (iOS)
Requirements
● Make sure your iOS device has Wi-Fi turned on (Apple Settings > Wi-Fi)
● Make sure your phone is connected to your home Wi-Fi network
(Connect is compatible with 2.4 gHZ Wi-Fi)
● The August Connect requires an active August Smart Lock and needs
to be installed using a compatible phone. Please visit our phone
compatibility page to ensure that your phone is compatible.
To install your August Connect:
● Plug In. Plug your August Connect into a power outlet within 15 feet of
your August Smart Lock for optimal performance and reliability.
● Wait for the flashing green light on your August Connect. If you don’t
see the flashing green light press and hold the button on your August
Connect for 3 seconds.
In the side menu, tap Set Up New Device

Choose Set Up An August Connect

If applicable, choose a lock to associate your Connect with.
When prompted, plug connect into an outlet near your door. Follow the in-app
instructions.

Apple’s accessory setup interface will ask you to choose your home Wi-Fi
network.

Once your Connect has successfully joined your home Wi-Fi network, the
August Home app will check the signal levels of your Wi-Fi and bluetooth
connections.

If your signal levels are good, you’re just about finished.

If your signal levels are low, you will be guided through adjusting the location
of your Connect to improve its connection.

Your Connect is now set up and ready to use!

Setting Up August Connect (Android)
To install your August Connect:
● Plug your August Connect into a power outlet within 15 feet of your
August Smart Lock for optimal performance and reliability.

● Wait for the flashing green light on your August Connect. If you don’t
see the flashing green light press and hold the button on your August
Connect for 3 seconds.
The August Connect requires an active August Smart Lock and needs to be
installed using a compatible phone. Please visit our phone compatibility page
to ensure that your phone is compatible.
Tap the Menu Icon
Select Settings

Select Your Lock in Lock Settings

Select Set Up August Connect

Select Begin Scan to Start the Connection Process

Enter Your Wi-Fi Password

The Connect is connecting to Your Wi-Fi Network

Select Done



