Loading ...
Loading ...
Installation instructions
Combi-Steam cooker with fixed water mains connection
Construction type 60–450
J23007113-R06
06/01/2020
J23007113-R06
3
Installation combinations
For an installation depth of less than 575mm, we recommend installing the appliance beneath other appliances for
space reasons.
If installing with a second appliance in the same niche, use the angle bracket set60W to support the appliance
above.
Below second appliance Above second appliance Above warming drawer
W
X456
Y
≥60
>550
W
450X
Y
≥60
>575
W
450X
Y
≥60
>550
X = Height of second appliance Y = Niche height
Installation
1. Check that the installation surface is absolutely level using a spirit level.
2. Place the appliance in front of the niche and connect the connection cable according to the connection plate.
3. Connect the reinforced hose and drain hose to the appliance.
4. Guide the drain hose round the screw connection of the fixed water connection according to the drawing below.
5. Adhere the cable holder K to the underside (and not to the back) and fix the drain hose with the cable holder.
6. Carefully slide the appliance into the niche until it is flush with the front of the cabinets, ensuring that the mains cable and hoses
are not kinked or pinched. Kinked hoses must be replaced. Pull the hoses through.
7. Open the appliance door and from the front secure the appliance at the sides with the 4 enclosed screws S.
8. Check the alignment of the appliance and ensure that it is not touching the decor.
9. Plumb in and check for leaks. Visually inspect between the
underside of the appliance and the cabinet.
The drain hose must go around the screw connection of the fixed water connection (see diagrams below).
K
K
Loading ...
Loading ...
Loading ...