Loading ...
Loading ...
Loading ...
PERIODIC MAINTENANCE AND ADJUSTMENT
7-34
7
3. Insert a new bulb into the socket
by pushing it in.
NOTICE
ECAU0081
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
4. Install the lens by installing the
screw.NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11192]
EAU24314
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
1. Screw
1
1. License plate light bulb
1
UB15E1E0.book Page 34 Tuesday, July 18, 2017 10:42 AM
Loading ...
Loading ...
Loading ...