Loading ...
Loading ...
Loading ...
English58
Installation instructions
Installation instructions
SimmerSear Burner Assembly (18K BTU Burner)
Keyed hole
Locating
tab
Burner base
Burner head
1. Put the burner heads in place as shown
below. The locating tab on the burner
head goes in the keyed hole as shown.
Tabs
Slots
Burner ring
2. Put the burner rings on the burner
heads as shown below. Match the tabs
on the bottom of the ring to the slots
on the burner head. Twist each ring
back and forth slightly to make sure it
is properly seated.
Ridge on bottom of burner cap
3. Put the burner caps on top of the
burner rings. You may use either the
supplied brass or porcelain caps. The
ridge around the bottom edge of the
cap goes around the top of the burner
ring.
WARNING
Be sure electrical power is off and all surfaces are cool before cleaning any part of the
cooktop.
Install_NY9900M_PRORANGE_DOP48M96DLM_DA_DG68-00936A-00_EN+MES+CFR.indb 58 2017-05-12 7:36:55
Loading ...
Loading ...
Loading ...