Loading ...
Loading ...
Loading ...
English34
Installation instructions
Installation instructions
Preparing for installation
WARNING
• If the gas or electric service provided does not meet the product specifications, do not
proceed with the installation. Call the dealer, the gas supplier or a licensed electrician.
• Before installing the range, you must locate and secure the anti-tip bracket to the floor.
NOTE
Within the Commonwealth of Massachusetts, this appliance must be installed by a licensed
plumber or gas fitter.
Unpacking the Range
Unpack the parts box and verify that all required components have been provided. If
any item is missing or damaged, please contact your dealer immediately. Do not install a
damaged or incomplete appliance.
Installing a Backguard (Optional)
Install the backguard before making the range gas and electrical connections. Install it
according the installation instructions included with the backguard kit.
Approved backguard kits:
Model Description
APB36D3 3 inch high backguard for range model DOP36M94DL*
APB36D9 9 inch high backguard for range model DOP36M94DL*
APB48D3 3 inch high backguard for range model DOP48M96DL*
APB48D9 9 inch high backguard for range model DOP48M96DL*
Install the Anti-Tip Bracket and Foot
Locate the anti-tip bracket included in the parts box.
There are two ways to mount the anti-tip bracket:
• Floor mounting (preferred method)
• Wall mounting (alternate method). Use this method if floor mounting is not suitable. If
the front panel of range is further than 26 1/2” (67.3 cm) from the back wall or if the
flooring is too thick (see Installing the Anti-Tip Bracket on the Wall), the wall mounting
method may not be used and the floor mounting method must be suitable.
Install_NY9900M_PRORANGE_DOP48M96DLM_DA_DG68-00936A-00_EN+MES+CFR.indb 34 2017-05-12 7:36:48
Loading ...
Loading ...
Loading ...