1. Home
  2. Philips
  3. Philips GC7330/02 User Manual
  4. Page 10

User Manual - Page 10

For GC7330/02.

Loading ...
Loading ...
Loading ...
Note: If dirt particles come out of the soleplate during steam ironing, rinse the steam tank strictly
according to the instructions in chapter ‘Cleaning and maintenance’, section ‘Rinsing the steam tank’.
Ironing without steam
Do not press the steam activator while you iron.
1 Settherequiredironingtemperature(seechapter‘Preparingforuse’,section‘Settingthe
temperature’).(Fig.6)
2 Putthemainspluginanearthedwallsocketandsettheon/offswitchtoon(GC7320/
GC7220)orpresstheon/offbutton(GC7330/GC7240/GC7230).(Fig.7)
, The soleplate starts to heat up.
3 GC7330/GC7240/GC7230:Pressthesteamselectorandselect‘nosteam’.(Fig.8)
, The‘no-steam’lightgoeson.
4 Iron without pressing the steam activator.
, If the steam tank is empty or has not heated up yet, you hear a clicking sound inside the tank.
This phenomenon is caused by the opening of the steam valve and is perfectly harmless.
After ironing
1 Switch off the appliance.
2 Remove the mains plug from the wall socket.
3 Put the iron on the iron stand and let the appliance cool down before you start to clean it.
Features
Vertical steam ironing
Never direct the steam at people.
1 Tosteamironhangingcurtainsandclothes(jackets,suits,coats),holdtheironinvertical
position(Fig.11).
2 Press the steam activator.
Variable steam & steam lights (GC7330/GC7240/GC7230 only)
- The appliance has two steam settings: low and high (see chapter ‘Using the appliance’, section
‘Steam ironing’).
- When the steam tank is ready for steam ironing, the steam light of the selected steam setting
stops ashing and is on continuously (Fig. 12).
’Water tank empty’ light (GC7330/GC7240/GC7230 only)
, Whenthewaterinthewatertankrunslowduringuse,the‘watertankempty’lightgoes
on(Fig.13).
1 Rellthewatertank(seechapter‘Preparingforuse’,section‘Rellingthewatertank’).
Steam boost (GC7240 only)
Never direct the steam at people.
The powerful steam boost helps to remove stubborn creases.
1 Set the temperature dial to a position between 3 and MAX.
2 Pressthesteamboostbutton(Fig.14).
ENGLISH10
Loading ...
Loading ...
Loading ...