Loading ...
Loading ...
Loading ...
5. Remove front sheet, do not peel decals off of weight plates.
QtyDescription
1Weight stack selector pin1
1Weight plate decals2
6. Repeat above steps for other half of the weight plate decals.
Install cable
1. Route cable through slot in top cover, through pulley bracket, and down through guide rod plate.
2. Install two BHSCS and two pulley shaft bolts securing top two pulley assemblies to pulley bracket using two
5/16” Allen wrenches.
QtyDescription
2Pulley shaft bolt1
2BHSCS2
2Top pulley assembly3
1Pulley bracket4
3. Squeeze sides of top weight cover together and lift up. Pull down on cable until it is tight. Install spiral pin
connecting cable to top weight.
QtyDescription
1Top weight cover1
1Spiral pin2
4. Verify the cable is moving smoothly.
5. Install back panel.
Page 15 of 24
Loading ...
Loading ...
Loading ...