Loading ...
Loading ...
Loading ...
Cleaning and Maintenance
29
EN
3.6 Extraordinary maintenance
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the racks/trays support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
4. Slide out and remove the light bulb.
5. Replace the bulb with one of the same
type (40W).
6. Refit the cover correctly, so that the
shaped part of the glass is facing the
door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
Removing the seal of the oven
To permit thorough cleaning of the oven, the
door seal may be removed. There are
fasteners on all 4 sides and in the middle to
attach it to the edge of the oven. Pull the
seal outwards at the indicated points in
order to remove it from the appliance.
To keep the seals clean, use a non-abrasive
sponge and lukewarm water. Seals should
be soft and elastic.
WARNING
ELECTRICAL SHOCK HAZARD
• Before servicing, disconnect the
appliance from the power supply.
Do not touch the halogen light
bulb directly with your fingers, but
wrap it in insulating material.
Loading ...