Loading ...
Loading ...
Loading ...
Cleaning and Maintenance
27
EN
Flame spreaders and burner caps
For easier cleaning, the flame spreaders
and the burner caps can be removed.
Wash them in hot water and non-abrasive
detergent. Carefully remove any
encrustation, then wait until they are
perfectly dry. Refit the flame spreaders
making sure that they are correctly
positioned in their housings with their
respective burner caps.
Visually checking pilot(s) and burner flames.
Igniters and thermocouples
For correct operation the igniters and
thermocouples must always be perfectly
clean. Check them frequently and clean
them with a damp cloth if necessary.
Remove any dry residues with a wooden
toothpick or a needle.
3.3 Removing the door
For easier cleaning, the door can be
removed and placed on a cloth.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges
indicated in the figure.
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
Loading ...
Loading ...
Loading ...