Loading ...
Loading ...
Loading ...
Black plate (433,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
Wattage Bulb No.
1) High beam headlight 12V-60W 9005 (HB3)
2) Low beam headlight
Models with HID light 12V-35W D2S
Models with halogen light 12V-55W H11
3)
Front turn signal/Front side marker light 12V-27/8W 1157NA
4)
Map light 12V-8W –
5)
Dome light 12V-8W –
6)
Front fog light 12V-51W 9006 (HB4)
7)
Door step light (STI) 12V-5W W5W
8)
Trunk room light (4-door) 12V-5W (W5W)
9)
High mount stop light (4-door, if equipped) 12V-21W (P21W)
10)
Rear turn signal light (4-door) 12V-21W (WY21W)
11)
Back-up light (4-door) 12V-16W 921
12) Brake/tail and rear side marker light (4-door) 12V-21/5W 7443
(W21/5W)
13)
Cargo area light (5-door) 12V-5W –
14)
Rear side marker light (5-door) 12V-5W 168
15)
Rear turn signal light (5-door) 12V-21W (WY21W)
16)
Back-up light (5-door) 12V-21W 7440
17)
Licence plate light 12V-5W 168 (W5W)
A)
High mount stop light (5-door) ––
B)
Brake/tail light (5-door) ––
C)
High mount stop light (4-door, if equipped) ––
D)
Side turn signal light (if equipped) –
–
WARNING
. Bulbs may become very hot while
illuminated. Before replacing
bulbs, turn off the lights and wait
until the bulbs cool down. Other-
wise, there is a risk of sustaining
a burn injury.
. For models with HID low beam
headlights, observe the following
precautions. Not doing so carries
the risk of an electric shock that
could result in serious injury
because the HID bulbs use an
extremely high voltage.
– Do not replace any headlight
bulbs (both low beam and
high beam) by yourself.
– Do not remove/restore the
headlight assemblies by your-
self.
– Do not remove any headlight-
assembly components by
yourself.
For replacement, contact your
SUBARU dealer.
Specifications 12-17
– CONTINUED –
12
Loading ...
Loading ...
Loading ...