Loading ...
Loading ...
Loading ...
Installation
English32
Installation
To adjust the height of the left side:
Insert a ๎at-head screwdriver into the
leveller of the front left leg. Turn the
leveller clockwise to raise, or turn it
anticlockwise to lower.
To adjust the height of the right side:
Insert a ๎at-head screwdriver into the
leveller of the front right leg. Turn the
leveller clockwise to raise, or turn it
anticlockwise to lower.
STEP 5 Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1. Remove the PE foam sheet on each shelf corner, which is attached to protect the
refrigerator during transportation.
2. Plug the power cord into the wall socket to turn the refrigerator on.
3. Open the door, and check if the interior light lights up.
4. Set the temperature to the coldest, and wait for about an hour. Then, the refrigerator
will be slightly chilled, and the motor will run smoothly.
5. Wait until the refrigerator reaches the set temperature. Now the refrigerator is ready
for use.
NOTE
When the refrigerator powers on, the alarm will sound. To turn off the alarm, tap <, O or >.
Untitled-6 32 2020-08-21 ๎๎ 4:42:33
Loading ...
Loading ...
Loading ...