Loading ...
Loading ...
Loading ...
12
Freezer Door
1. Remove the freezer door handle. Using a 1/8" hex key, loosen
the setscrew located on the side of the handle. Pull the handle
straight out from the door. Keep all parts together.
A. Shoulder screw C. Flat-head handle screws
B. Setscrew
2. Remove the brand badge using the plastic tool (provided).
Replace it with the badge provided in the Reversibility Kit
located inside the crisper. For proper placement, see the
Brand Badge Placement template (the last page of this
manual).
NOTES:
� To avoid scratching the finish, do not use a sharp or
metallic object to pry the brand badge from the door.
� Rub a small amount of liquid dish soap over any adhesive
residue with your fingers. Rinse the door with warm water
and dry with a soft cloth.
3. Remove door stop. Move to opposite side of freezer door as
shown.
A. Door Handle Sealing Screws
4. Refer to image in Step 1. Reinstall freezer handle on opposite
side of the freezer door.
5. Tighten all screws. Set aside door until hinges and refrigerator
compartment door are in place.
Refrigerator Door
1. Remove the refrigerator door handle. Using a 1/8" hex key,
loosen the setscrew located on the side of the handle. Pull the
handle straight out from the door. Keep all parts together.
A. Flat-Head Handle Screw B. Set Screw
2. Remove door hinge hole plug from refrigerator door. Move to
opposite side hinge hole as shown below.
A. Door Hinge Hole Plug
3. Remove door handle hole plug and discard. Replace on
opposite side with the door handle hole plug provided in the
Reversibility Kit located in the crisper.
4. Remove door stop. Move to opposite side of refrigerator door
as shown below.
A. Door Stop Screw B. Door Stop
5. Refer to image in Step 1. Reinstall refrigerator handle on
opposite side of the refrigerator door.
6. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on refrigerator.
Loading ...
Loading ...
Loading ...