Loading ...
Loading ...
Loading ...
15
8. Once the range is placed into its final location, place a carpenter’s level on the oven floor to ensure that the
range is level from side to side and front to back.
NOTE: The range must be level for optimal cooking and baking performance. Use a wrench to adjust the height
of the leveling legs until the range is level from side to side and front to back.
HOW TO LEVEL THE RANGE
IMPORTANT: The range MUST BE level for optimal cooking and
baking.
1. To adjust the leveling legs of the range, it must first be pulled
forward to disengage itself from the anti-tip bracket.
2. Place a standard flat rack in oven.
3. Place the level on the rack.
4. Use a wrench to adjust the leveling legs up or down until the
range is level.
5. Once level, push the range back into position. Check to ensure
the rear foot is engaged in the anti-tip bracket.
Figure 15
Figure 16
HOW TO CHECK OPERATION
Electronic Burner Ignition System
NOTE: The cooktop and oven burners use electronic igniters in place of standing pilots.
• Cooktop Ignition: When the cooktop control knob is turned to the “Lite” position, the system creates a
spark to light the burner. The sparking continues, as long as the control knob is turned to “Lite”.
• Oven Ignition: When the oven control is turned to the desired setting, sparking will occur and ignites the gas.
Standard Surface Burners
Push in and turn the control knob to the “Lite” position. The flame should light within 4 seconds. The first time a
burner is lit, may take longer than 4 seconds to light due to air in gas lines. Try each burner in succession until all
burners have been checked.
What to do if burners do not light properly:
1. Turn all burner control knobs to the “Off” position.
2. Check to see that the range is plugged in. Also check that the circuit breaks has not tripped or the house
fuse has not blown.
3. Check the gas shut-off valves are set to the open position.
4. Check the burner caps are properly positioned on each burner base.
NOTE: If the burner continues not to light then contact your dealer or authorized service company for assistance.
How to Adjust Flame Height
Adjust the height of top burner flames.
The cooktop “Low” burner fame should
be a steady blue flame approximately
1/4” (0.64 cm) high.
Low Flame High Flame
Loading ...
Loading ...
Loading ...