Loading ...
Loading ...
Loading ...
Instructions
34
Check if:
• All food is packed properly. Containers
must be dry before being placed in the
refrigerator.
• The refrigerator doors are opened
frequently.
Humidity of the room will enter the
fridge each time the doors are opened.
Humidity increases faster if the doors
are opened frequently, especially if the
humidity of the room is high.
• There is a build-up of water droplets on
the rear wall. This is normal after automat-
ic defrosting (in Static Models).
The doors are not opening or closing
properly Check if:
• There is food or packaging preventing
the door from closing
• The door compartments, shelves and
drawers are placed properly
• The door gaskets are broken or torn
• Your appliance is level.
The edges of the appliance in contact
with the door joint are warm
Especially during summer (warm weath-
er), the surfaces in contact with the door
joint may become warmer during opera-
tion of the compressor. This is normal.
Important Notes:
• In the case of a power failure, or if the
appliance is unplugged and plugged
in again, the gas in the cooling system
of your refrigerator will destabilise,
causing the compressor protective
thermal element to open. Your refriger-
ator will start to operate nor
mally after
5 minutes.
• If the appliance will not be used for
a long period of time (such as during
holidays), disconnect the plug. Defrost
and clean the refrigerator, leaving the
door open to prevent the formation of
mildew and odour.
• If the problem persists after you have
followed all the instructions above,
please consult Smeg Service.
• This appliance is designed for domes-
tic use and for the stated purposes
only. It is not suitable for commercial
or common use. If the consumer uses
the appliance in a way that does not
comply with these instructions, we
emphasise that the manufacturer and
the dealer will not be responsible for
any repair or failure within the warran-
ty period.
Installation
Loading ...