Loading ...
Loading ...
Loading ...
Page 10 of 22
Part D
Part E.
User's Guide : Loading of Gas Tank into the Fire Table /
Column.
User's Guide : Connecting the Fire Table / Column to the Gas
Cylinder.
Step 1 : Plug the Black Coupling Nut on the
Regulator to the Cylinder Valve.
Step 2 : Turn the Black Coupling Nut, fully
CLOCKWISE until fully locked into the position.
Step 3 : Check for Leaks by : Brush some soap and
water mixture on all connections.
Turn the gas supply on;if extra large bubbles form
on any connection there may be a leak. If you smell
gas or a leak is discovered, IMMEDIATELY turn the
gas valve off, disconnect Propane Gas tank.
Do not use the appliance until the leak is repaired
This next step guides you to connect the Fire Table / Column Regulator to the Gas Cylinder.
Load the Gas Tank / Gas Cylinder as indicated by
the bold black arrow.
Place the Tank / Cylinder gently and snugly into the
Metal Stand.
Position the Wing Screw / Nut in place.
Turn the Wing Screw until fully tightens into the Nut.
The Gas Tank / Gas Cylinder is now secured in
place.
The Fire Table / Column has a Door. Remove the
Door and leave the Door on the floor.
Inside, you will see a Metal Stand with pre-attached
Wing Screw / Nut.
Proceed to Unscrew the Wing Screw / Nut
Loading ...
Loading ...
Loading ...