Loading ...
Loading ...
Loading ...
- 7 -
STEP 3
A: Fix the Top Cross Frame (3) to the Upright Frames (2) with the Hex bolts (27), Flat washers
(17) & Nylon nuts (18), then fix the Chin-up Bar (7) to the Top Cross Frame (3) with the Allen
cylindrical bolts (50) & End cap washers (51).
B: Connect the Steel Cable (48) to the Handle (45), feed the Steel Cable (48) passing by the
pulleys as direction shown, then pull to tight the Steel Cable (48) and fix it to the Slide Guide
Joint (4L/R) with the Allen bolts (36) as shown.
C: The Low Lat Bar (8), Curl Bar (9) and Lat Grip Rope (58) are options to replace the Handle (45)
for different workouts.
NOTE: Check whether the equipment is shaken unsteadily after installation. If it appears,
force the both side Stabilizers (1) to the outside or push it to the inside slightly to adjust
the equipment until it is stable.
Loading ...