Loading ...
Loading ...
English 3
Installation
Plastic grid Installation on Undercabinet Hoods
1. Measure and mark the centerline of the cabinet to the soft above.
2. Measure from the bottom of the cabinet to the centerline of the where
the vent will come through the soft. Mark the location and use a saber
saw or keyhole saw to cut a 5¾” (14.6 cm) hole for the plastic grid.
3. Use 2 - 4.5 x 13 mm screws to attach the plastic grid to the cabinet
or soft.
B
A
A.Vent cover
B. Centerline
Plastic Grid Installation
on top of the cabinet
Plastic Grid Installation
on the front of the soft
A
B
D
G
F
E
H
A
G
B
D
E
F
C
A. Ceiling
B. Plastic grid
C. Soft
D. 6” (15.2 cm) vent
E. Range hood
F. Cabinet
G. Wall
H. 12” (30.5 cm) min. cabinet height
Charcoal lter
In the reciruclating mode, the air will be recirculated through disposable
charcoal lters that help remove smoke and odors.
• Remove the grease lter of the hood.
• Cover the grill that protects the suction motor with the carbon lter so
that the slots on the lter correspond to the pins on the sides of the
motor protection grill.
• Turn the carbon lter clockwise to block them (bayonet xing).
NOTE: The charcoal lters cannot be cleaned. It should be replaced
every 4-6 months (depending on hood usage).
Loading ...
Loading ...
Loading ...