Loading ...
Loading ...
Loading ...
VIZIO VP423 HDTV10A User Manual
Version 5/16/2008 29
www.VIZIO.com
Chapter 3 Setting Up to Watch Television
For ‘Preparing Your PLASMA HDTV for Wall Mounting’, see page 6.
3.1 Basic PLASMA HDTV Start Up
1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the HDTV, and then plug the
power cord into an AC wall socket.
2. Connect Audio and Video Cables to the HDTV
(see pages 14 ~ 28 for detailed steps)
3. Turning Po
wer On
Once all the components are connected, press the Power ON button on the side of the HDTV, or
press the Power ON (Orange) button on the remote control.
4. Initial Setup
After powering on the TV set, the Initial
Setup screen will come up; please press
the
button on the remote control.
The Language choice screen will be
displayed; the default English option is
highlighted. If you wish to change the
OSD language to Español or Français,
press the button on the remote
control to select the language you want.
Press the button on the remote to go to the next screen.
Note: At this point, if a Set-Top Box from your Local Cable or Satellite Service Company or other
equipment is been used; please press the LAST key on the remote control and skip to Step 5 on page 31.
If this
is not your case, please continue at Step b.
a. The Tuner screen will be
displayed; default choice is
Antenna. If you are using Cable
(No Box) Service, press the
button on the remote control to
highlight CABLE.
Press the button on the
remote to go to the next screen.
Loading ...
Loading ...
Loading ...