Loading ...
Loading ...
Loading ...
Selecting the setting mode:
a
Turn the ignition switch to the ON position.
b
Press and hold the SEL button and SET
button until the ON/OFF setting display
changes.
c
Press the SEL button until the desired setting
mode is displayed. When the SEL button is
pressed, the setting mode will be changed.
d
When the SET button is pressed, each
setting mode will be changed.
To return to the ordinary display from the
setting mode:
● The SEL button and/or SET button is not
pressed for about 30 seconds.
● Turn the ignition switch to the OFF
position, and then to the ON position.
● Press and hold SEL button and SET
button.
While operating settings, each setting will be
cancelled if the SET button is not pressed.
20180125134256_31MKL6000_enu_BOOK Page 40 Thursday, January 25 2018 13:52:25 JST
Operation Guide
37
Continued
Loading ...
Loading ...
Loading ...