What do the codes on my Philips Air Purifier mean?

Your Philips Air Purifier gives you reassurance by displaying real-time indoor air quality codes. Discover what the codes mean. Meanings of codes in Philips Air Purifiers Depending on the Air Purifier model you have, you might find one or more of the following indicators or codes: Code: A Auto mode Code: C Gas mode (AC3254 and AC3256 only) Code: L Child lock on Code: UL Child lock off Code: F0 Clean the pre-filter Code: A0 to A9 Replace NanoProtect S3 HEPA filter Code C0 to C9: Replace NanoProtect S3 AC filter Code SL Sleep Mode Code 1h: Timer mode Code t: Turbo Mode. Error Code: Er The hall sensor is not working properly. Remove and then reattach the front panel. If the error code “Er” still persists, we recommend you to contact us. Error code: E1 to E4 The appliance has malfunctions. In this case, we recommend you to contact us.

Can I switch off the Wi-Fi feature in my Philips Air Purifier?

Wi-Fi is a key feature in your Philips Air Purifier. For this reason, it cannot be switched off manually. Please note that the Wi-Fi will be automatically switched off if it can’t be connected within 15 minutes after your air purifier is on. However, for a better interactive experience, we strongly recommend you to connect Wi-Fi with the Clean Home+ App for multi-functions.

Can I clean the filters and pre-filter of my Philips Air Purifier?

You can clean or wash the pre-filter (indicated as C in the image below). The other filters (indicated as A and B in the image below) cannot be washed: they need to be replaced. Please check your user manual to see replacement indications specific for your model. My Philips Air Purifier is without a pre-filter For AC17xx, AC29xx, AC30xx, AC38xx, AC42xx, there is no pre-filter. When filter cleaning alert (Figure 1) displays on the screen, clean the surface of the filter with a vacuum cleaner. When filter replacement alert (Figure 2) displays on the screen, it’s time to replace the filter. Please check your user manual to see replacement indications specific for your model. For AC08xx, there is no pre-filter nor filter cleaning alert. Please follow the cleaning schedule and instructions on user manual to clean the surface of the filter with a wet cloth or a vacuum cleaner. When filter replacement alert (Figure 2) displays on the screen, it’s time to replace the filter. Please check your user manual to see replacement indications specific for your model.

Philips AC2936/33 2000i Series air purifier User Manual

EN User manual 1 ZH-T 使用手冊 15

AC2936

AC2939

1EN

Contents

1 Your air purier ��2

Product overview ��2

Controls overview ��3

2 Getting started ��3

Installing the lter ��3

Wi-Fi indicator �� 4

Wi-Fi connection ��4

3 Using the air purier ��4

Air quality light ��4

Turning On and O ��5

Changing the mode setting ��6

Switching the display indicator �� 7

Using the light on/o function �� 7

Checking the lter status ��8

4 Cleaning and maintenance ��8

Cleaning the body of the air purier �� 8

Cleaning the particle sensor ��8

Cleaning the surface of the lter �� 9

Replacing the lter ��10

Filter reset �� 11

5 Storage �� 11

6 Troubleshooting �� 12

2 EN

1 Your air purifier

Congratulations on your purchase, and welcome to Philips!

To fully benet from the support that Philips oers, register your product at

www�philips�com/welcome�

Product overview

Control panel

Air outlet

Back

cover

NanoProtect lter

Series 3 (FY2180/30)

Particle sensor

3EN

Controls overview

2 Getting started

Installing the lter

Note: Make sure the air purier is unplugged from the electrical outlet before installing the lter�

1 2 3 4 5

1 Pull the back cover and remove it from the appliance�

2 Pull the lter from the appliance�

3 Remove all packaging materials of the air purication lter�

4 Put the lter back into the appliance�

5 Reattach the back cover�

Wi-Fi indicator

Filter cleaning alert

Filter replacement alert

Filter status/ reset button

Power on/o button

Mode display:

Auto ( )

Turbo ( )

Gentle ( )

Sleep ( )

Display switch button

Mode switch button

Light on/o button

4 EN

Wi-Fi indicator

Wi-Fi icon status Wi-Fi connection status

Blink in orange Connecting to the smartphone

Blink in white Connecting to the router

Stable in white Connected to the router

O Wi-Fi function disabled

Wi-Fi connection

First time connection

1 Download and install the Philips “Clean Home+” app from the

App Store or Google Play�

2 Connect your smartphone or tablet to your Wi-Fi network�

3 Launch the “Clean Home+” app and click on “Connect a New

Device” or press the “+” button on the top of the screen� Follow

the onscreen instructions to connect the air purier to your network�

Reset the Wi-Fi connection

1 Touch and for 3 seconds until you hear a beep�

» The Wi-Fi indicator blinks orange�

2 Follow the steps 3 in “First time connection” section�

Note: Please check www�philips�com/cleanhome for the latest update of supported Operation

System and devices�

3 Using the air purifier

Air quality light

After approximately 30 seconds, the particle sensor selects the color that

corresponds to the surrounding air quality of airborne particles�

Note: The color of the air quality light is determined by the highest risk index among PM2�5, IAI

and readings�

5EN

IAI refers to the level of indoor air allergen�

IAI level Air quality light color Air quality level

1-3 Blue Good

4-6 Blue-purple Fair

7-9 Purple-red Poor

10-12 Red Very poor

PM2�5 refers to airborne particle pollutants smaller than 2�5 micrometers.

PM2�5 level Air quality light color Air quality level

≤12 Blue Good

13-35 Blue-purple Fair

36-55 Purple-red Poor

>55 Red Very poor

Turning On and O

Note:

• Put the plug of the air purier in the power socket�

• If the purier stays connected to the electrical outlet after turning OFF, the air purier will operate

under the previous settings when turned ON again�

• Touch to switch on the air

purier�

• The “ ” displays on the screen

during warming up� Then the air

purier shows the IAI/PM2�5 level

after measuring the air quality�

6 EN

3

s

• The air purier operates in the

auto mode with IAI displayed on

the screen�

• Touch and hold the button for

3 seconds to switch o the air

purier�

Changing the mode setting

You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by

touching the button�

Auto mode ( ): The air purier

automatically adjusts the fan speed

in accordance with the ambient air

quality�

Turbo mode ( )：The air purier

operates on the highest speed�

Gentle mode ( ): The air purier

operates at a low speed�

Sleep mode ( ): The air purier

operates quietly at a low speed�

After 3 seconds, the screen lights o�

7EN

Switching the display indicator

Note:

• The appliance display IAI level by default�

Using the light on/o function

You can touch the light on/o button manually to turn o all lights and the

control pa

nel� Touch any button to wake up all lights�

With the light sensor:

• The control panel can automatically turn on, turn o or dim according to

the ambient light�

• The control panel will be o or dim when the ambient light is dark�

You can touch any button to wake up all lights� If no further operation, all lights

will be o or dim again to match with the ambient light�

8 EN

Checking the lter status

• Touch the lter status check/reset button to check the lter service life

status�

Icon color Display (%)

Blue 16-100

Blue-purple 9-15

Purple-red 4-8

Red 0-3

Note: The appliance goes back to normal display if no operations after 3 seconds�

4 Cleaning and maintenance

Note:

• Do not attempt to clean the particle sensor with a vacuum cleaner�

• Switch o the air purier and unplug from the power socket before following action�

Cleaning the body of the air purier

Use a soft, dry cloth to clean both the interior and

exterior of the air purier and the air outlet�

Cleaning the particle sensor

Clean the particle sensor every 2 months for optimal functioning of the

appliance�

1 Clean the particle sensor inlet

and outlet with a soft brush�

2 Clean the particle sensor with a

damp cotton swab� Dry all parts

thoroughly with a dry cotton swab�

9EN

Cleaning the surface of the lter

Clean the surface of lter with vacuum cleaner

when the lter cleaning alert display on the

screen�

1 Pull the

back

cover and

remove it

from the

appliance�

2 Pull the

lter

from the

appliance�

3 Clean the

surface of

the lter

with a

vacuum

cleaner�

4 Put the

lter back

into the

appliance�

5 Reattach

the back

cover�

3

s

6 Touch the button

to switch on the

appliance�

7 Touch and hold the

lter status check/reset

button for 3 seconds

to reset the lter

cleaning time�

8 Wash your hands

thoroughly after

cleaning the lter�

10 EN

Replacing the lter

Note:

• The lter is not washable or reusable�

• Do not smell the lter as it has collected pollutants from the air�

When the lter need to be replaced, the lter

replacement alert lights up red�

1 Replace the lter with Philips NanoProtect lter Series 3 (FY2180/30) ,

Please follow the step of Chapter “Installing the lter”�

3

s

2 Touch the button

to switch on the

appliance�

3 Touch and hold the

lter status check/

reset button for

3 seconds to reset

the lter replacement

time�

4 Wash your

hands

thoroughly after

replacing the

lter�

11EN

Filter reset

You can also replace the lter before lter replacement alert ( ) displays on

the screen� After replacing a lter, you need to reset the lter lifetime counter

manually�

3

s

+

1 Touch the power

button for 3 seconds

to turn o the

appliance and unplug

from power socket�

2 Put the power

plug in the power

socket�

3 Within 15 seconds after

power on, touch and

hold and button for

3 seconds to reset the

lter lifetime counter.

5 Storage

1 Turn o the air purier and unplug from the power socket�

2 Clean the air purier, particle sensor and the surface of the lter (see the

chapter “Cleaning and maintenance”)�

3 Let all parts air dry thoroughly before storing�

4 Wrap the lter in air tight plastic bags�

5 Store the air purier, lter in a cool, dry location�

6 Always thoroughly wash hands after handling lters�

12 EN

6 Troubleshooting

This chapter summarizes the most common problems you could encounter

with the appliance� If you are unable to solve the problem with the information

below, contact the Consumer Care Center in your country�

Problem Possible solution

The appliance

does not work

properly�

• The lter replacement alert has been on continuously

but you have not replaced the corresponding lter� As a

result, the appliance is now locked� In this case, replace

the lter and long press to reset the lter lifetime

counter�

The airow that

comes out of

the air outlet

is signicantly

weaker than

before�

• The surface of the lter is dirty� Clean the surface of the

lter (see the chapter “Cleaning and maintenance”)�

The air quality

does not improve,

even though the

appliance has

been operating

for a long time�

• Check if the packing material is removed from the lter�

• The lter has not been placed in the appliance� Make

sure that the lter (FY2180/30) is properly installed�

• The particle sensor is wet� The humidity level in your

room is high and causes condensation� Make sure that

the particle sensor is clean and dry (see the chapter

“Cleaning and maintenance”)�

• Room size is large or the outdoor air quality is poor�

For optimum purication performance, please close the

doors and windows when operating the air purier�

• There are indoor pollution resources� For instances,

smoking, cooking, incense, perfume or alchohol�

• Filter reaches the end of life� Replace the lter with a

new one�

The color of the

air quality light

always stays the

same�

• The particle sensor is dirty� Clean the particle sensor

(see the chapter “Cleaning and maintenance”)�

13EN

Problem Possible solution

The appliance

produces a

strange smell�

• The rst few times you use the appliance, it may

produce a plastic smell� This is normal� However, if the

appliance produces a burnt smell even if removing

lters, contact your Philips dealer or an authorized

Philips service center� The lter may produce smell after

being used for a while because of the absorption of

indoor gases� It’s recommended that you reactivate the

lter by putting it in direct sunlight for repeated use� If

odor still exists, replace the lter�

The appliance is

extra loud�

• It's normal if the appliance runs at the Turbo mode�

• In the Auto mode, if the appliance is too loud, maybe

the appliance runs at high speed because air quality

becomes worse, or your personalized setting in App

triggers a higher fan speed� You can choose the Sleep

mode, or change the settings in the app�

• If anything drops into air outlet, it may also cause

abnormal loud sound� Immediate turn o appliance,

turn appliance upside down, to get foreign objectives

out of appliance�

• If there is abnormal sound, contact the Consumer Care

Center in your country�

The appliance still

indicates that I

need to replace a

lter, but I already

did�

• Perhaps you did not reset the lter lifetime counter�

Switch on the appliance� Then touch and hold the reset

button ( ) for 3 seconds�

Error code “E1”

displays on the

screen�

• The motor has malfunctions� Contact the Consumer

Care Center in your country�

14 EN

Problem Possible solution

The Wi-Fi setup is

not successful�

• If the router your purier is connected to is dual –

band and currently it is not connecting to a 2�4GHz

network, please switch to another band of the same

router (2�4GHz) and try to pair your purier again�

5GHz networks are not supported� If your purier is

connected to a dual – band router, please switch to

the 2�4GHz network of the router and try to pair your

purier again�

• Web authentication networks are not supported�

Public Wi-Fi such as oce or hotel networks are not

supported�

• Check if the purier is within range of the Wi-Fi router�

You can try to locate the air purier closer to the Wi-Fi

router�

• Check if the Wi-Fi password is correct� The password is

case-sensitive�

• Retry the setup with the instructions in section “Reset

the Wi-Fi connection”�

• Keep the appliance away from other electronic devices

that may cause interferences�

• Check if the mobile device is in airplane mode� Make

sure to have the airplane mode deactivated when

connecting to the Wi-Fi network�

• If the Wi-Fi pairing fails after trying several times,

please turn of the cellular data on your smartphone in

the Settings section and start the pairing again�

• If the Wi-Fi icon on your purier’s display is in stable

white but without seeing the purier in your app, click

on “Connect a New Device” and add the purier from

the local list on “Begin setup” page�

• Consult the help section in the app for extensive and

up-to-date troubleshooting tips�

15ZH-T

1

您的空氣清新機

��16

產品概要

�� 16

控制鍵概覽

��17

2

使用入門

��17

安裝濾網

��17

Wi-Fi

指示燈

��18

Wi-Fi

連接

�� 18

3

使用空氣清新機

��19

空氣質素燈

�� 19

開關

��20

更改模式設定

�� 21

切換顯示指示燈

�� 21

使用開燈

/

關燈功能

��22

檢查濾網狀態

��22

4

清潔及保養

�� 23

清潔空氣清新機機身

�� 23

清潔微粒感應器

�� 23

清潔濾網表面

�� 24

更換濾網

�� 25

重設濾網

��26

5

儲存

�� 26

6

疑難排解

��27

16 ZH-T

微粒感應器

顯示模式：

自動

( )

特強

( )

柔風

( )

睡眠

( )

1

您的空氣清新機

感謝您購買

Philips

產品，同時歡迎您來到

Philips

世界！

請前往以下網址註冊您的產品，以獲得

Philips

的完整支援：

www�philips�com/welcome

。

產品概要

控制面板

排氣口

後蓋

納米級防護

S3

型濾網

(FY2180/30)

17ZH-T

控制鍵概覽

2

使用入門

安裝濾網

備註：安裝濾網前，請確保將空氣清新機的插頭從電源插座拔出。

1

2 3 4 5

1

拉起後蓋，從產品拆下。

2

從產品拉出濾網。

3

移除空氣淨化濾網的所有包裝物料。

4

將濾網裝回本產品。

5

重新裝上後蓋。

Wi-Fi

指示燈

清潔濾網

提示

濾網更換

警示

濾網狀態

/

重設按鈕

電源開

/

關按鈕

顯示模式：

自動

( )

特強

( )

柔風

( )

睡眠

( )

顯示切換按鈕

模式切換按鈕

開燈

/

關燈按鈕

18 ZH-T

Wi-Fi

指示燈

Wi-Fi

圖示狀態

Wi-Fi

連接狀態

閃爍橙色燈光

正在連接智能電話

閃爍白色燈光正在連接路由器

穩定顯示白色燈光

已連接至路由器

關閉

Wi-Fi

功能已停用

Wi-Fi

連接

首次連接

1

下載並安裝

Philips

「

Clean Home+

」

應用程式，請前往

App Store

或

Google Play

。

2

將您的智能手機或平板電腦連接至您的

Wi-Fi

網絡。

3

啟動「

Clean Home+

」應用程式，然後點擊「連接新裝置」或點按

畫面頂部的「

+

」按鈕。按照畫面上的指示，將空氣清新機連接至

您的網絡。

重設

Wi-Fi

連線

1

同時按住

和

3

秒，直至聽到「嗶」聲為止。

»

Wi-Fi

指示燈

閃爍橙色燈光。

2

請按照「首次連接」部分的步驟

3

操作。

備註：請瀏覽

www�philips�com/cleanhome

，以了解支援作業系統和裝置的最新資料。

19ZH-T

3

使用空氣清新機

空氣質素燈

約

30

秒後，微粒感應器會根據周遭空中粒子的空氣質素，選擇相應的顏色。

備註：空氣質素燈的顏色由

PM2�5

、

IAI

和讀數的最高風險指數決定。

IAI

指室內過敏原水平。

IAI

水平

空氣質素指示燈的顏色空氣質素水平

1-3

藍色良好

4-6

藍紫色一般

7-9

紫紅色差

10-12

紅色非常差

PM2�5

指空氣中小於

2�5

微米的的有害微粒

。

PM2�5

水平

空氣質素指示燈的顏色空氣質素水平

≤

12

藍色良好

13-35

藍紫色一般

36-55

紫紅色差

>55

紅色非常差

20 ZH-T

開關

備註：

• 將空氣清新機的插頭插入電源插座。

• 如空氣清新機在「關閉」後繼續連接至電源插座，空氣清新機在再次「啟動」時，將按之前的設定

操作。

•

按下

以開啟空氣清新機。

•

正準備運作時，「」將顯示在

螢幕上。在測量空氣質素後，空氣

清新機會顯示

IAI/PM2�5

水平。

3

s

•

空氣清新機會以自動模式運作，並在

螢幕上顯示

IAI

。

•

輕按住

按鈕

3

秒以關閉空氣清

新機。

21ZH-T

更改模式設定

您可輕按

按鈕

，選擇特強模式、柔風模式或睡眠模式。

自動模式

(

)

：

空氣清新機會根據空氣

質素環境自動調節風扇速度。

特強模式

( )

：空氣清新機以最高速

度運作。

柔風模式

(

)

：

空氣清新機以緩慢速度

運作。

睡眠模式

(

)

：

空氣清新機以緩慢

速度安靜運作。

3

秒後，螢幕的燈光

會關閉。

切換顯示指示燈

備註：

• 此產品默認顯示

IAI

水平。

22 ZH-T

使用開燈

/

關燈功能

您可以輕按開燈

/

關燈按鈕

來關閉所有燈光和控制面板

。輕按任何按鈕來喚醒所有

燈光。

使用光線感應器：

• 控制面板根據環境光線自動開啟、關閉或變暗。

• 在環境光線昏暗時，控制面板便會關閉或變暗。

您可以輕按任何按鈕來喚醒所有燈光。如果沒有進一步操作，所有燈光便會關閉或變

暗以配合環境光線。

檢查濾網狀態

• 點按濾網狀態檢查

/

重設

按鈕，以檢查濾網的使用壽命狀態。

圖示顏色顯示

(%)

藍色

16-100

藍色

-

紫色

9-15

紫色

-

紅色

4-8

紅色

0-3

備註：如果

3

秒後沒有進行操作，本產品會回到正常顯示畫面。

23ZH-T

4

清潔及保養

備註：

• 請勿以吸塵機清潔微粒感應器。

• 關閉空氣清新機，並根據以下操作將其從電源插座拔出。

清潔空氣清新機機身

使用柔軟的乾布清潔空氣清新機和排氣口的內部和外部。

清潔微粒感應器

每

2

個月清潔一次微粒感應器，讓本產品發揮出最佳功能。

1

使用柔軟毛刷子微粒感應器的進氣

口及排氣口。

2

使用濕棉花棒清潔微粒感應器。使用

乾爽的棉花棒徹底擦乾所有部件。

24 ZH-T

清潔濾網表面

螢幕顯示清潔濾網提示

時，使用吸塵機清潔濾網

表面。

1

拉起後蓋，

從產品

拆下。

2

從產品拉出

濾網。

3

使用吸塵機

清潔濾網

表面。

4

將濾網裝回

本產品。

5

重新裝上

後蓋。

3

s

6

按下

按鈕開啟本

產品。

7

按住濾網狀態檢查

/

重設

按鈕

3

秒，以重新設

定濾網清潔時間。

8

清潔濾網後，必須

徹底洗淨雙手。

25ZH-T

更換濾網

備註：

• 請勿清洗或重用濾網。

• 因濾網滿佈空氣中的污染物，請勿嗅聞濾網。

需要更換濾網時，濾網更換提示

燈會亮起紅色。

1

更換納米級防護

S3

型濾網

(FY2180/30)

濾網，請根據「安裝濾網」部分的

步驟操作。

3

s

2

按下

按鈕開啟本

產品。

3

按住濾網狀態檢查

/

重

設按鈕

3

秒，以重新

設定濾網更換時間。

4

更換濾網後，

必須徹底洗淨雙

手。

26 ZH-T

重設濾網

您亦可以在屏幕顯示濾網更換警示（）之前更換濾網。更換濾網後，您需要手動

重設濾網壽命計算器。

3

s

+

1

輕按電源

按鈕

3

秒

以關閉本產品，並將插

頭從電源插座拔出。

2

將電源插頭插入電

源插座。

3

開啟電源後

15

秒內，按住

及

按鈕

3

秒

，以重設

濾網壽命計算器。

5

儲存

1

關閉空氣清新機，並將插頭從牆身插座拔出。

2

清潔空氣清新機、微粒感應器和濾網表面（請參閱「清潔及保養」章節）。

3

必須讓所有部件風乾方可存放。

4

將濾網放入密封膠袋中。

5

將空氣清新機、濾網存放於陰涼乾爽的地方。

6

處理濾網後，必須徹底洗淨雙手。

27ZH-T

6

疑難排解

本章節總結一些您在本產品上最常見的問題。如果您按照以下資料仍未能解決問

題，請聯絡您的國家的

Philips

顧客服務中心。

問題可行解決方案

本產品無法正確

操作。

• 濾網更換提示燈已亮起但沒有更換相應濾網，因此本產品已

被鎖定。在這情況，請更換該濾網並按住

，以重設濾網壽

命計算器。

排氣口排出的風量

比以前明顯減弱。

• 濾網的表面骯髒。清潔濾網表面（請查看「清潔及保養」章

節）。

本產品經過長時間

運作，空氣質素仍

沒有改善。

• 請檢查是否已移除濾網的所有包裝物料。

• 本產品的濾網未有更換。確保正確安裝濾網

(FY2180/30)

。

• 微粒感應器變濕。您的房間濕度高，導致水分凝結。確保微

粒感應器清潔和保持乾燥（請參閱「清潔及保養」章節）。

• 房間面積大或室外空氣質素差。

為獲得最佳淨化性能，請在操作空氣清新機時關閉門窗。

• 有室內污染源頭。例如，吸煙、烹飪、焚香、香水或酒精。

• 濾網的使用壽命結束。更換全新的濾網。

空氣質素光環的

顏色永遠保持同一

顏色。

• 微粒感應器處於骯髒的狀態。清潔微粒感應器（請查看

「清潔及保養」章節）。

本產品發出一陣

怪味。

• 在您最初數次使用本產品時，它可能會發出一點塑膠氣味。

此為正常。可是，如果本產品在更換濾網後發出燒焦的氣

味，請聯絡您的

Philips

經銷商或認可的

Philips

服務中

心。由於吸收了室內氣體，濾網使用一段時間後可能會產生

氣味。建議您將濾網置於陽光下，然後再重新使用。如果仍

有異味，請更換濾網。

28 ZH-T

問題可行解決方案

本產品聲浪太大。 • 如果本產品運行特強模式，屬正常現象。

• 在自動模式中，如果本產品聲響太大，可能是因為空氣質素

變差，或者您在應用程式中的個人化設定令風扇速度提高，

所以產品才以高速運行。您可以選擇睡眠模式，或在應用程

式中更改設定。

• 如果有任何東西掉入排氣口，亦有可能產生異常響亮的聲

音。立即關閉產品，並倒轉產品，以便從產品中取出外來

物體。

• 如果仍然有不正常的聲響，請聯絡您所在國家

/

地區的客戶

服務中心。

即使我已替換濾

網，本產品仍表示

需要替換。

• 可能您沒有重設濾網的使用時間。開啟本產品按住重設按鈕

(

) 3

秒。

螢幕顯示「

E1

」的

錯誤代碼。

• 摩打出現故障。請聯絡您所在國家

/

地區的客戶服務中心。

未能成功設定

Wi-Fi

。

• 如果本產品所連接的路由器為雙頻，而目前不是連接

2�4GHz

網絡的話，請將該路由器的頻段切換至

2�4GHz

，

然後再次嘗試進行配對。不支援

5GHz

網絡。如果本產品

連接至雙頻寬路由器，請切換至

2�4GHz

網絡，然後再次嘗

試進行配對。

• 產品不支援網上驗證網絡。不支援辦公室或酒店網絡等公共

Wi-Fi

。

• 檢查本產品是否在

Wi-Fi

路由器所覆蓋的範圍內。您可以嘗

試將空氣清新機移近

Wi-Fi

路由器。

• 請檢查

Wi-Fi

密碼是否正確。密碼有大小寫之分。

• 根據「重設

Wi-Fi

連線」部分的指示，嘗試重新設定。

• 讓本產品遠離可能會造成干擾的其他電子裝置。

• 請檢查流動裝置是否處於飛行模式。連接至

Wi-Fi

網絡時，

請確保已停用飛行模式。

• 如果

Wi-Fi

配對失敗數次，請於智能手機的設定中關閉流動

數據，然後再嘗試配對。

• 如果產品螢幕的

Wi-Fi

指示燈顯示白色燈光，但在應用程式

中未能找到您的產品，請點擊「連接新裝置」，然後在「開

始設定」的列表中增加產品。

• 請參閱應用程式中的說明部分，以獲取最新的詳細疑難排解

貼士。

3000 048 50062

Philips AC2936/33 2000i Series air purifier

Product's Documents

User Manual

Specifications

Philips AC2936/33 Questions and Answers

#1 What do the codes on my Philips Air Purifier mean?

#2 Can I switch off the Wi-Fi feature in my Philips Air Purifier?

#3 Can I clean the filters and pre-filter of my Philips Air Purifier?

Related Products

Philips AC2889/41 Series 2000i Air Purifier

Philips AC3055 Air Purifier

Philips AC0650/20 Air purifier

Philips AC2936/33R1 Air Purifier for Large Rooms

Philips AC4236/10 Air Purifier for XXL Rooms

Philips AC1214/60R1 Air Purifier - Refurbished