Loading ...
Loading ...
Loading ...
SETTING DESCRIPTIONS:
01 (Scale):
Displayed temperatures shown in F/C degrees.
02 (Temp. Calibration): Gives user flexibility to adjust
the perceived measured temperature that is used for
thermal control.
03 (Available Modes): Determines which system modes are
available to the user when pressing the System Mode
button.
04 (Max. Heat): Sets the maximum temperature that a user
can adjust the target temperature to for heating.
05 (Min. Cool): Sets the minimum temperature that a user
can adjust the target temperature to for cooling.
06 (System Type): Selects the type of heating/cooling
equipment that is present in the system.
07 (Heat Pump Valve Type): Determines if the combined
O/B terminal operates as “B” (energized while in Heat
mode), or as “O” (energized while in Cool mode).
08 (Auto Dead-Band): Determines the amount of
temperature separation needed for Auto Mode to
change between Heat and Cool modes
09 (Swing / Temp. Dierential): Determines how wide or
narrow the temperature control band is between cut-in
and cut-out.
10 (Aux. Stage Oset): Sets the number of degrees from the
setpoint, that will cause the second heat stage to turn
on.
12 (High Fan): Permits or prevents the capability for using
the high-speed fan mode.
13 (Programming): Determines if the thermostat acts as a
programmable thermostat with period changes during
the day, or manual operation only.
14 (Clock Format): Determines the appearance and usage of
the clock digits, either AM and PM, or 24hr military time.
15 (Periods per/Day): Sets the quantity of temperature
periods used per programming day.
16 (Auto Daylight Savings): Determines if the thermostat
automatically adjusts the clock for Daylight Savings
Time or requires manual adjustment in the spring and
fall.
17 (Backlight Always On): Allows the display backlight to
remain on constantly or turn o automatically aer 10
seconds.
18 (Set Temp Aer Mode Change): Determines if the
thermostat recalls the last used set temperature per
mode or uses a default set temperature when the mode
is changed manually.
19 (Default Heat Mode Set Temp): Determines the default
set temperature that is used when first selecting heat
mode.
20 (Default Cool Mode Set Temp): Determines the default
set temperature that is used when first selecting cool
mode.
98 (Delay Bypass): Contractor/Installer mode, turns o
the compressor delays for testing the system; returns
automatically to normal operation aer 5 minutes.
99 (RESET): Returns all settings back to factory defaults.
9) AUTOMATIC DAYLIGHT SAVINGS TIME
By default, the thermostat will automatically adjust
the clock for Daylight Savings. This can be disabled by
changing the Auto Daylight Savings (setting 16) option
in the installer menu.
10) SET CLOCK AND TEMPERATURE PROGRAM
SCHEDULE
NOTE: Waiting 1-Minute with no button presses will exit
the settings menu, with all items saved as they were last
shown on the display screen.
With thermostat powered,
press System Mode button
until OFF is underlined.
Aer OFF mode is
confirmed, press and
hold BOTH the Menu and
Up buttons for at least 5
seconds until the screen
changes.
Use Up or Down buttons to move the underline with
the selection item you want to adjust and then press
the System Mode button one time to enter selection.
CLOCK DIGITS = adjusts the current real-time clock.
HEAT = programming area to adjust the heating
temperature set points for each day and period.
COOL = programming area to adjust the cooling
temperature set points for each day and period.
EXIT? = exits the clock and programming menu and
returns thermostat to the main home screen in O mode.
11) ADJUSTING THE REAL-TIME CLOCK
• Upon entering clock settings, the blinking hour
digits are adjusted using the Up or Down buttons.
Continue to press either Up or Down to cycle all
the way around and swap between AM and PM as
needed.
• Press the Menu button to advance to setting the
minutes, using the Up/Down buttons to change
value.
• Press the Menu button to advance to setting the
year, using the Up/Down buttons to change value.
• Press the Menu button to advance to setting the
month, using the Up/Down buttons to change value.
• Press the Menu button to advance to setting the day,
using the Up/Down buttons to change value.
Loading ...