Loading ...
Loading ...
Loading ...
English22
Installation
Installation
A
F
C
E
30 mm
5. Insert the door brackets (C) on the
custom panel to the holes (E) on the the
dishwasher door to x the custom panel.
6. While holding the custom panel, attach
it to the door and insert the custom
panel xers (A) into the holes (F) as
shown in the gure.
7. Push the custom panel downward to x.
CAUTION
Do not let the custom panel extend
more than 30 mm from the top of the
dishwasher.
UP
DOWN
UP
DOWN
30°
8. Adjust the spring level while the door
is approximately opened at 30 degrees.
The door should hold its position, and
should not fall open.
CAUTION
• Do not adjust the spring level while the
door is completely opened.
• If the custom panel weighs more than
5 kg, the door may fall open.
• Custom panels weighing more than 5 kg
are not recommended.
DW4000RM(A5)_IB_DD81-02709D-05_EN.indd 22 2021-04-06 3:52:25
Loading ...
Loading ...
Loading ...