Loading ...
Loading ...
Loading ...
English 21
Installation
STEP 5 Install the custom panel
Ø2
~8
1. Put the installation template on the
back of the custom panel and x it
temporarily using transparent tape. Note
that the rear of the custom panel will be
attached to the dishwasher door.
CAUTION
• The top end of the custom panel must
be aligned with the top end of the
installation template.
• Use a custom panel between 2 kg and
5 kg.
2. Mark 6 points guided on the installation
template.
A
B
A
B
3. Remove the installation template, and
then tighten the custom panel xers (A)
with 2 screws (B, Ø3.5 X 25) as shown in
the gure.
D
C
4. Tighten the door bracket (C) with
8 screws (D, Ø4 X 14) as shown in the
gure.
DW4000RM(A5)_IB_DD81-02709D-05_EN.indd 21 2021-04-06 3:52:25
Loading ...
Loading ...
Loading ...